Abstract:As a result of a collaboration between Jefferson Lab and niobium manufacturer CBMM, ingot niobium was explored as a possible material for superconducting radiofrequency (SRF) cavity fabrication. The first single cell cavity from large grain high purity niobium was fabricated and successfully tested at Jefferson Lab in 2004. This pioneering work triggered research activities in other SRF laboratories around the world. Large grain niobium became not only an interesting alternative material for cavity builders, but also material scientists and surface scientists were eager to participate in the development of this material. Most of the original expectations for this material of being less costly and allowing less expensive fabrication and treatment procedures at the same performance levels in cavities have been met. Many single cell cavities made from material of different suppliers have been tested successfully and several multi-cell cavities have shown the performances comparable to the best cavities made from standard poly-crystalline niobium. Several 9-cell cavities fabricated by Research Instruments and tested at DESY exceeded the best performing fine grain cavities with a record accelerating gradient of Eacc = 45.6 MV/m. Recently- at JLab- by using a new furnace treatment procedure a single cell cavity made of ingot niobium performed at a remarkably high Q0-value (~5x10^10) at an accelerating gradient of ~20 MV/m, at 2K. Such performance levels push the state-of-the art of SRF technology to new limits and are of great interest for future accelerators. This contribution reviews the development of ingot niobium technology and attempts to make a case for this material being the choice for future accelerators.

R&d on the niobium-copper superconducting cavity

Research and experiments on niobium-sputtered superconducting QWR in Peking University

R&D OF NIOBIUM-SPUTTERED COPPER QWR FOR HEAVY ION LINAC IN PEKING UNIVERSITY

RESEARCHES AND EXPERIMENTS ON NIOBIUM-SPUTTERED SUPERCONDUCTING QWR IN PEKING UNIVERSITY

SUPERCONDUCTING TESTS AND BEAM LOAD EXPERIMENTS ON NIOBIUM-COATED COPPER QWR AT PKU

Researches And Preliminary Experiments On Copper-Niobium Sputtered Low-Beta Superconducting Resonator

Studies on the Improvement of Niobium-Sputtered Quarter Wave Resonator Superconducting Cavity

Nb Sputtered 325 MHz QWR Cavities for CIADS

Development Of High Purity Niobium Used In Srf Accelerating Cavity

Continuous Wave Mode Test of Conduction-Cooled Nb3Sn Radio Frequency Superconducting Cavities at Peking University

Demonstration of Niobium Tin in 218 MHz Low-beta Quarter Wave Accelerator Cavity

The Rise of Ingot Niobium as a Material for Superconducting Radiofrequency Accelerating Cavities

Design, Fabrication, and Beam Commissioning of A Continuous-Wave Four-Rod Rf Quadrupole

Design and study of a continuous wave RFQ for the BISOL high intensity deuteron driver linac

Recent Progress of a CW 4-Rod RFQ for the SSC-LINAC

Study on laser annealing of niobium films deposited on copper for RF superconducting cavities

Improving the Stability of Pulse Superconducting Radio Frequency Cavities by the Construction of an Al-Nb Double Layer Structure

Effective medium temperature baking of 1.3 GHz single cell SRF cavities

Superconducting niobium cavities of improved thermal conductivity

Low-Temperature Baking Effect of the Radio-Frequency Nb<sub>3</sub>Sn Thin Film Superconducting Cavity

STUDY ON A LOW BETA HIGH CURRENT TAPER TYPE SUPERCONDUCTING HALF WAVE RESONATOR FOR BISOL*