Abstract:The coating of thin niobium film on copper RF cavities is a very interesting alternative to the bulk-Nb cavities, since copper is cheaper than niobium, has higher thermal conductivity and better mechanical stability. The technology of magnetron sputtering for coating copper cavities with superconducting thin film was successfully used for the production of 350 MHz LEP accelerating cavities at CERN. Unfortunately, the observed degradation of the quality factor with increasing cavity voltage restricts the use of sputtered accelerating cavities in future large accelerators working at gradients higher than Vacuum arc coating is known to be a powerful technique to produce films on several materials [1]. Its main advantages compared to standard sputtering are the ionized state of the evaporated material, absence of gases to sustain the discharge, high energy of the atoms reaching the substrate surface and possibility to have very high deposition rates. For the arc ignition it is necessary to produce a small plasma plume of sufficient density to form a high-conductivity path between cathode and anode. We have used for ignition a Nd-YAG pulsed laser focused on the cathode surface, which provides a reliable system and allows eliminating all possible sources of contaminants. We have proven that the arc technique produces bulk-like films suitable for superconducting applications. Its main disadvantage is the production of macroparticles that deposit on the film, can increase its roughness and may induce field emission. We present our recent results on the characterization of niobium films produced by UHV cathodic arc under different conditions, focusing mainly on the study of the macroparticle phenomenology.

Researches And Preliminary Experiments On Copper-Niobium Sputtered Low-Beta Superconducting Resonator

Studies on the Improvement of Niobium-Sputtered Quarter Wave Resonator Superconducting Cavity

R&D OF NIOBIUM-SPUTTERED COPPER QWR FOR HEAVY ION LINAC IN PEKING UNIVERSITY

R&d on the niobium-copper superconducting cavity

RESEARCHES AND EXPERIMENTS ON NIOBIUM-SPUTTERED SUPERCONDUCTING QWR IN PEKING UNIVERSITY

Research and experiments on niobium-sputtered superconducting QWR in Peking University

SUPERCONDUCTING TESTS AND BEAM LOAD EXPERIMENTS ON NIOBIUM-COATED COPPER QWR AT PKU

Performance Improvment of RF Superconducting Cavity

Development and characterization of Nb3Sn/Al2O3 superconducting multilayers for particle accelerators

Electromagnetic Design and Optimization of a Superconducting Quarter Wave Resonator

Characterizing materials for superconducting radiofrequency applications-A comprehensive overview of the quadrupole resonator design and measurement capabilities

Improving the Stability of Pulse Superconducting Radio Frequency Cavities by the Construction of an Al-Nb Double Layer Structure

Stable Acceleration of a LHe-Free Nb 3 Sn demo SRF e-linac

Enhanced radio-frequency performance of niobium films on copper substrates deposited by high power impulse magnetron sputtering

Influence of material parameters on the performance of niobium based superconducting RF cavities

Development Of High Purity Niobium Used In Srf Accelerating Cavity

Stable Acceleration of a LHe-Free Nb3Sn demo SRF e-linac Based on Conduction Cooling

Studies of LL-type 500MHz 5-cell superconducting cavity at SINAP

Researches On The Electromagnetic Field In Rf Superconducting Cavities

Fabrication of the Cu/AgCuTi/Nb composite for superconducting radio-frequency material under extreme service conditions based on electroplating additive manufacturing

UHV ARC FOR SUPERCONDUCTING NIOBIUM FILM DEPOSITION