Influence of dispersion method of LaF3 in ZrB2-based ceramics on high-temperature oxidation resistance
Jing Hu,Qi Li,Jianliang Xie,Peng Liu,Shaoliang Jiang,Xin Wang,Liangjun Yin,Li Zhang,Haipeng Lu,Linbo Zhang,Longjiang Deng
DOI: https://doi.org/10.1016/j.ceramint.2021.03.074
IF: 5.532
2021-06-01
Ceramics International
Abstract:The high-temperature applications of zirconium diboride (ZrB2) ceramics are hindered due to their easy initial oxidation at temperature around 700 °C. Although mixing and coating methods have been introduced to enhance the oxidation resistance of ZrB2-based ceramics, their thorough comparative analysis still demands a more systematic exploration. Herein, spark plasma sintered ZrB2@20 vol% LaF3 and ZrB2+20 vol% LaF3 ceramics prepared by coating and mixing powders, respectively, were used to study the influence of dispersion method of LaF3 on their oxidation resistance. After oxidation at 1000 °C for 4 h, a thin oxide layer (~25 μm) and low weight gain (9%) confirmed the superior oxidation resistance of ZrB2+20 vol% LaF3 over ZrB2@20 vol% LaF3, which could be attributed to the formation of a dense surface layer due to the self-healing mechanism. In turn, the poor oxidation resistance of ZrB2@20 vol% LaF3 was caused by the “anchoring” of LaF3 cladding layer and locally-coated ZrB2 particles, which led to the in situ reactions and formation of a porous oxide scale (~400 μm). Finally, the discrepant oxidation resistance mechanisms of ZrB2–LaF3 ceramics obtained by different dispersion methods of LaF3 were proposed.
materials science, ceramics