Abstract:Two compositions Ce0.50Zr0.39La0.04Y0.07O2−δ and Ce0.25Zr0.65La0.04Y0.06O2−δ based on ceria-zirconia solid solutions were prepared as nanopowders using a continuous hydrothermal flow synthesis reactor, followed by either freeze-drying or hotplate-drying of the slurry. Each dried nanopowder was then subjected to 10h heat-treatment at 1000°C, 1100°C or 1200°C in air (to simulate accelerated ageing). The reducibility and hydrogen consumption of the oxidised samples were measured using temperature programmed reduction (TPR) up to 1000°C. The effects of composition, drying method and heat-treatment temperature were evaluated on the TPR profiles of the materials. The powders were further investigated using a range of analytical methods including UV/Vis spectroscopy (which yielded colour data), Raman spectroscopy, powder X-ray diffraction, BET surface area measurements and X-ray photoelectron spectroscopy (XPS). Chemometric methods were used to investigate relationships between the spectroscopic and total oxygen storage capacity (OSC) data. Principal component analysis (PCA) was used to provide a simple interpretation of the effects of various synthesis and treatment parameters on Raman spectra. Principal component regression (PCR) was used to build regression models relating the Raman spectra and the temperature of hydrogen consumption peak at several set temperatures in the TPR. The total hydrogen consumption of the materials was generally high, while the drying and heat-treatment conditions appeared to have a significant effect on the final properties of the resulting powders, such as the surface area and total oxygen storage capacity.

Influence of dispersion method of LaF3 in ZrB2-based ceramics on high-temperature oxidation resistance

Improving oxidation resistance of ZrB2-based ceramics by LaF3 doping via oxidation-induced self-healing mechanism

High temperature oxidation resistance of hot-pressed h-BN/ZrO 2 composites

Synthesis and Characterization of Doped Nano-Sized Ceria–zirconia Solid Solutions

Enhanced Sintering Resistance in LaYbZr2O7 System Through HfO2 Doping for Thermal Insulation Ceramic Materials

Preparation and thermal shock resistance investigation of ZTA-La 2 O 3 composite ceramics for porous medium combustion materials

Enhanced Mechanical Properties and Oxidation Resistance of Zirconium Diboride Ceramics via Grain‐Refining and Dislocation Regulation

Effect of Lu2O3 addition on the oxidation behavior of SiC-ZrB2 composite coating at 1500 °C: Experimental and theoretical study

Strategy to boost hydrolysis resistance and stabilize low infrared emissivity of ZrB2 via nanoscale LaF3 surface modification

Effect of Zr2Al4C5 Content on the Mechanical Properties and Oxidation Behavior of ZrB2-SiC-Zr2Al4C5 Ceramics

The Oxidation of ZrB2/MoSi2 Ceramics in Dissociated Air: The Influence of the Elaboration Technique

Effect of dispersants on the physicochemical properties of ultra-fine ZrB2 powder in Sol-gel synthesis

Effect of the ZrB2 content on the oxygen blocking ability of ZrB2-SiC coating at 1973K

Comparative study of B4C, Mg2B2O5, and ZrB2 powder additions on the mechanical properties, oxidation, and slag corrosion resistance of MgO–C refractories

Effect of La2o3 on Resistance to High-Temperature Oxidation of Laser Clad Ferrite-Based Alloy Coatings

Effect of the Y2O3 amount on the oxidation behavior of ZrB2-SiC-based coatings for carbon/carbon composites

Influence of B-site substituent Ce on thermophysical, oxygen diffusion, and mechanical properties of La2Zr2O7

Effect of La2O3 on Microstructure and Thermal Conductivity of La2O3-Doped YSZ Coatings

Enhanced oxidation resistance of HfB2‐SiC‐ZrSi2 coating at 1700°C through low‐loss film‐forming treatment

High temperature oxidation resistance of Y2O3 modified ZrB2-SiC coating for carbon/carbon composites

Synthesis of high-entropy La2B2O7 ceramics with non-equivalent principal elements in B-sites and their CMAS resistance performance