Abstract:Mullite (Al6Si2O13) and ytterbium disilicate (Yb2Si2O7) powders were synthesized by the solvent gel (sol-gel) method. To improve the oxidation resistance of Cf/SiC composites at high temperatures, a novel tri-layer Yb2Si2O7/Al6Si2O13/SiC environment barrier coatings (EBCs) was deposited on the surface of Cf/SiC composites by chemical vapor deposition (CVD) and air spray sol-gel methods. Results show that Yb2Si2O7/Al6Si2O13/SiC coating lost its ability to protect Cf/SiC composites in the air environment at 1773 K due to the Yb2Si2O7 particles in Yb2Si2O7 top coating diffused into the Al6Si2O13 middle coating, which eventually form a eutectic interface with the extension of oxidation time. However, Yb2Si2O7/Al6Si2O13/SiC coating can efficiently prevent the oxidation of Cf/SiC composites at 1673 K for 150 h with a weight loss of 2.69 × 10−3 g·cm−2. The growth of grains and the disappearance of micro-holes in Al6Si2O13 and Yb2Si2O7 coatings deposited by air spray sol-gel method led to the excellent oxidation resistance of Yb2Si2O7/Al6Si2O13/SiC coating.

Effect of Yb2O3 addition on oxidation/ablation behaviors of ZrB2-MoSi2 composite coating under different environment

Formation and Oxidation Behavior of Mo-Si-B Composite Coatings with B-rich Interlayer Prepared by Slurry Sintering Method

Effect of the Y2O3 amount on the oxidation behavior of ZrB2-SiC-based coatings for carbon/carbon composites

Effect of Lu2O3 addition on the oxidation behavior of SiC-ZrB2 composite coating at 1500 °C: Experimental and theoretical study

High temperature oxidation resistance of Y2O3 modified ZrB2-SiC coating for carbon/carbon composites

Microstructure and properties of Mo-Si-B-Y 2 O 3 composite coating on nickel-based alloy by laser cladding

Oxidation behaviors and mechanisms of Yb2O3-doped silicon coatings fabricated by vacuum plasma spray

The enhanced structure stability and the reinforcement mechanism of 0.1Al2O3-ZrO2 reinforced MoSi2 composite coating

The Effect of Cr Addition on the Strength and High Temperature Oxidation Resistance of Y2O3 Dispersion Strengthened Mo Composites

The Effect of MoAlB Substitutions on the Oxidation Behavior of ZrB2-SiC Composites at 1600°C

Effect of Nano-ZrO2 on the Microstructure and High Temperature Tribological Properties of MoSi2 Coating

Evolution behavior of rare-earth yttria modified silicide oxidation-resistant coating at 1700 oC

Effects of Y2O3 Addition on the Microstructure and Static Lead-Bismuth Eutectic Thermal Corrosion Behaviors of FeCrAlTiC-xY2O3 Laser Clade Coatings

Evolution of Microstructure, Thermophysical and Mechanical Properties and Wetting Behavior of Plasma-Sprayed Yb2O3 and Y2O3 Co-Stabilized ZrO2 Coatings During High-Temperature Exposure and CMAS Corrosion

Ablation behavior and mechanisms of ZrC-SiC-MoSi2 coated C/C-SiC-ZrC ceramic matrix composites under oxyacetylene torch

Effect of Sc2O3 Doping on YSZ TBCs: Morphologies, Phase Composition, Mechanical Properties, and High-Temperature Oxidation Resistance

Oxidation properties of tri-layer ytterbium-disilicate/mullite/silicon-carbide environment barrier coatings for Cf/SiC composites

Thermal shock behavior and oxidation resistance of novel SiC nanowires+Si/Yb2Si2O7-Si/Yb2Si2O7 environmental barrier coatings

Effect of Y2O3 on the sliding wear resistance of TiB/TiC-reinforced composite coatings fabricated by laser cladding

Effect of Si, Al2O3 additives on the ablation behavior of ZrB2-SiC coating with Al2O3-modified SiC bond coat for C/C composites

Phase transitions and microstructure evolutions of in-situ YSZ-ZrC composite coating under long-time plasma torch ablation