Abstract:Multi-track Ti-based wear-resistant composite coatings were fabricated on TC4 alloy surfaces using laser-clad TC4 + Ni45 + Co–WC mixed powders with different Y2O3 contents (0, 1, and 3 wt%). The microstructure, microhardness, and tribological properties of the coatings were characterised using X-ray diffraction, scanning electron microscopy, energy dispersive spectrometry, electron probe X-ray micro analyser, microhardness tester, and friction and wear testing apparatus. The results showed that the number of cracks on the coating surfaces gradually decreased with the addition of Y2O3 and that residual Co–WC powders existed in the coating subsurfaces. The phase composition of the coatings with different Y2O3 contents remained unchanged and was mainly composed of reinforcing phases of TiC, TiB2, Ti2Ni, and matrix α-Ti. With the addition of Y2O3, the coating microstructure was remarkably refined, the direction characteristic of the TiC dendrites obviously weakened, and the nucleation rate significantly increased. When the added Y2O3 was 3 wt%, a large amount of TiB2–TiC-dependent growth composite phases precipitated in the coating. The two-dimensional lattice misfit between (0001)TiB2 and (111)TiC was 0.912%, which indicated that TiB2 and TiC formed a coherent interface. When the amount of Y2O3 was increased, the microhardness of the coatings gradually decreased, and the wear volume of the coatings first increased and then decreased. Under the effect of the TiB2–TiC composite phases, the wear resistance of the 3 wt% Y2O3 coating was optimal. The 3 wt% Y2O3 coating friction coefficient was the lowest, and the wear mechanism was abrasive wear.

Effects of Y2O3 Addition on the Microstructure and Static Lead-Bismuth Eutectic Thermal Corrosion Behaviors of FeCrAlTiC-xY2O3 Laser Clade Coatings

Effect of Y2O3 Addition on the Microstructure and Liquid LBE Cavitation Erosion Behaviors of Fe-Cr-Al-Ti-C-xY2O3 Laser Clade Coatings

Effects of Y2O3 Content on Wear Resistance and Corrosion Resistance of 316L/TiC Coating Fabricated by Laser Cladding

Effect of Y2O3 content on microstructure and corrosion behavior of ZrO2 coatings in liquid Lead-Bismuth eutectic

Investigation into tribocorrosion behaviors of CoCrFeNiNb laser-clad coatings with Y2O3

Improvement of the mechanical properties and LBE cavitation erosion resistance of laser cladded FeCrAlTiC coating by Y<sub>2</sub>O<sub>3</sub> addition

Effect of Y2O3 Content on Microstructure and Corrosion Properties of Laser Cladding Ni-Based/WC Composite Coated on 316L Substrate

Effects of CeO2 on the Microstructure and Properties of Laser Cladding 316L Coating

Effect of Y2O3 on the sliding wear resistance of TiB/TiC-reinforced composite coatings fabricated by laser cladding

Effect of Y2O3 addition on the organization and tribological properties of Ni60A/Cr3C2 composite coatings obtained by laser-cladding

EFFECT OF Y2O3 ON MICROSTRUCTURES AND WEAR RESISTANCE OF TiC REINFORCED Ti-Al-Si COATING BY LASER CLADDING ON TC4 ALLOY

Effect of Y on Microstructure and Properties of Al0.8FeCrCoNiCu0.5 High Entropy Alloy Coating on 5083 Aluminum by Laser Cladding

Tribological and Corrosion Properties of Al2O3@Y2O3-Reinforced Ni60A Composite Coatings Deposited Using Laser Cladding

Study on Microstructure and Mechanical Properties of A100-Y2O3 Coatings on Low-Carbon Steel by Laser Cladding

Influence of Y2O3 on the microstructure and tribological properties of Ti-based wear-resistant laser-clad layers on TC4 alloy

Microstructure and high-temperature properties of Fe-Ti-Cr-Mo-B-C-Y2O3 laser cladding coating

Effects of Tempering and Y2O3 Content on the Microstructure and Wear Characteristics of a Laser Metal Deposition (LMD) Composite Coating on a Titanium Alloy

Effect of Y2O3 Content on Microstructure and Wear Resistance of Laser Cladding Layer of Stellite-6 Alloy

Effect of La2o3 on Resistance to High-Temperature Oxidation of Laser Clad Ferrite-Based Alloy Coatings

Microstructure and Properties of 35.8%Fe-20%Ti-20%Al-24%Cr-0.2%Y2O3 Coatings Prepared by Laser Cladding

Wear and corrosion mechanisms of Ni–WC coatings modified with different Y2O3 by laser cladding on AISI 4145H steel