Abstract:Multi-track Ti-based wear-resistant composite coatings were fabricated on TC4 alloy surfaces using laser-clad TC4 + Ni45 + Co–WC mixed powders with different Y2O3 contents (0, 1, and 3 wt%). The microstructure, microhardness, and tribological properties of the coatings were characterised using X-ray diffraction, scanning electron microscopy, energy dispersive spectrometry, electron probe X-ray micro analyser, microhardness tester, and friction and wear testing apparatus. The results showed that the number of cracks on the coating surfaces gradually decreased with the addition of Y2O3 and that residual Co–WC powders existed in the coating subsurfaces. The phase composition of the coatings with different Y2O3 contents remained unchanged and was mainly composed of reinforcing phases of TiC, TiB2, Ti2Ni, and matrix α-Ti. With the addition of Y2O3, the coating microstructure was remarkably refined, the direction characteristic of the TiC dendrites obviously weakened, and the nucleation rate significantly increased. When the added Y2O3 was 3 wt%, a large amount of TiB2–TiC-dependent growth composite phases precipitated in the coating. The two-dimensional lattice misfit between (0001)TiB2 and (111)TiC was 0.912%, which indicated that TiB2 and TiC formed a coherent interface. When the amount of Y2O3 was increased, the microhardness of the coatings gradually decreased, and the wear volume of the coatings first increased and then decreased. Under the effect of the TiB2–TiC composite phases, the wear resistance of the 3 wt% Y2O3 coating was optimal. The 3 wt% Y2O3 coating friction coefficient was the lowest, and the wear mechanism was abrasive wear.

Microstructure and high-temperature properties of Fe-Ti-Cr-Mo-B-C-Y2O3 laser cladding coating

Microstructures and properties of TiN reinforced Co-based composite coatings modified with Y2O3 by laser cladding on Ti–6Al–4V alloy

Microstructure and properties of Mo-Si-B-Y 2 O 3 composite coating on nickel-based alloy by laser cladding

Study on microstructure and properties of laser-clad Fe-based (Ti, V)C composite coatings

Microstructure and Properties of 35.8%Fe-20%Ti-20%Al-24%Cr-0.2%Y2O3 Coatings Prepared by Laser Cladding

Effect of Y2O3 on the sliding wear resistance of TiB/TiC-reinforced composite coatings fabricated by laser cladding

Influence of Y2O3 on the microstructure and tribological properties of Ti-based wear-resistant laser-clad layers on TC4 alloy

Influence of Y2O3 addition on the microstructure of TiC reinforced Ti-based composite coating prepared by laser cladding

EFFECT OF Y2O3 ON MICROSTRUCTURES AND WEAR RESISTANCE OF TiC REINFORCED Ti-Al-Si COATING BY LASER CLADDING ON TC4 ALLOY

Microstructure and Properties of WC Reinforced Ni-based Composite Coatings with Y2O3 Addition on Titanium Alloy by Laser Cladding

Microstructure and wear properties of TiC/FeCrBSi surface composite coating prepared by laser cladding

Synthesis of Y2O3 particle enhanced Ni/TiC composite on TC4 Ti alloy by laser cladding

Microstructure and tribological properties of laser cladded TiAlSi composite coatings reinforced by yttria-stabilized zirconia

Effect of Y2O3 addition on the organization and tribological properties of Ni60A/Cr3C2 composite coatings obtained by laser-cladding

Investigation into tribocorrosion behaviors of CoCrFeNiNb laser-clad coatings with Y2O3

Surface microstructures and properties of oxide-reinforced FeCrAl matrix composite coatings prepared by laser cladding on a ferritic-martensitic steel

Wear performance of FeCuMoTiV high entropy alloy coatings by laser cladding

Microstructure, High-Temperature Wear Resistance, and Corrosion Resistance of Laser Cladded Co-Based Coating

Microstructure, thermostability and tribological behavior of composite CoCrFeNiTix high-entropy alloy coatings fabricated by laser cladding

High-temperature oxidation and wear properties of TiC-reinforced CrMnFeCoNi high entropy alloy composite coatings produced by laser cladding

Effects of TiC on the Microstructure and Mechanical Properties of Four Fe-Based Laser Cladding Coatings