Abstract:Multi-track Ti-based wear-resistant composite coatings were fabricated on TC4 alloy surfaces using laser-clad TC4 + Ni45 + Co–WC mixed powders with different Y2O3 contents (0, 1, and 3 wt%). The microstructure, microhardness, and tribological properties of the coatings were characterised using X-ray diffraction, scanning electron microscopy, energy dispersive spectrometry, electron probe X-ray micro analyser, microhardness tester, and friction and wear testing apparatus. The results showed that the number of cracks on the coating surfaces gradually decreased with the addition of Y2O3 and that residual Co–WC powders existed in the coating subsurfaces. The phase composition of the coatings with different Y2O3 contents remained unchanged and was mainly composed of reinforcing phases of TiC, TiB2, Ti2Ni, and matrix α-Ti. With the addition of Y2O3, the coating microstructure was remarkably refined, the direction characteristic of the TiC dendrites obviously weakened, and the nucleation rate significantly increased. When the added Y2O3 was 3 wt%, a large amount of TiB2–TiC-dependent growth composite phases precipitated in the coating. The two-dimensional lattice misfit between (0001)TiB2 and (111)TiC was 0.912%, which indicated that TiB2 and TiC formed a coherent interface. When the amount of Y2O3 was increased, the microhardness of the coatings gradually decreased, and the wear volume of the coatings first increased and then decreased. Under the effect of the TiB2–TiC composite phases, the wear resistance of the 3 wt% Y2O3 coating was optimal. The 3 wt% Y2O3 coating friction coefficient was the lowest, and the wear mechanism was abrasive wear.

Microstructures and properties of TiN reinforced Co-based composite coatings modified with Y2O3 by laser cladding on Ti–6Al–4V alloy

Microstructure and performance of Ti-based wear-resistant laser cladding coatings with rare-earth oxides

Microstructure and Properties of WC Reinforced Ni-based Composite Coatings with Y2O3 Addition on Titanium Alloy by Laser Cladding

Microstructure and high-temperature properties of Fe-Ti-Cr-Mo-B-C-Y2O3 laser cladding coating

Influence of Y2O3 addition on the microstructure of TiC reinforced Ti-based composite coating prepared by laser cladding

Effect of Y2O3 on the sliding wear resistance of TiB/TiC-reinforced composite coatings fabricated by laser cladding

EFFECT OF Y2O3 ON MICROSTRUCTURES AND WEAR RESISTANCE OF TiC REINFORCED Ti-Al-Si COATING BY LASER CLADDING ON TC4 ALLOY

Influence of Y2O3 on the microstructure and tribological properties of Ti-based wear-resistant laser-clad layers on TC4 alloy

Microstructure and Tribological Behavior of Laser Cladding TiAlSi Composite Coatings Reinforced by Alumina–titania Ceramics on Ti–6Al–4V Alloys

Effect of Y2 O3 on Microstructural Characteristics and Wear Resistance of Cobalt-Based Composite Coatings Produced on TA15 Titanium Alloy Surface by Laser Cladding

Microstructure and Wear Properties of Laser Clad Tin/Co-Based Composite Coating

Synthesis of Y2O3 particle enhanced Ni/TiC composite on TC4 Ti alloy by laser cladding

Microstructure and wear properties of TiCN/Ti coatings on titanium alloy by laser cladding

Microstructure and tribological performance of Ni60-based composite coatings on Ti6Al4V alloy with different Ti3SiC2 ceramic additions by laser cladding

Microstructure and Properties of TiAl Composite Coatings Prepared by Laser Cladding under Multi-Phase β0/CoAl2Ti Phase Strengthening

Microstructure and Wear Properties of Composite Coatings Produced by Laser Cladding of Ti-6al-4v with Graphite and Silicon Mixed Powders

Effect of SiC and TiC content on microstructure and wear behavior of Ni-based composite coating manufactured by laser cladding on Ti-6Al-4V

Effect of process parameters on the microstructure evolution and wear property of the laser cladding coatings on Ti-6Al-4V alloy

Microstructure and Corrosion of Laser Cladding Coatings on Titanium Alloy With Nd2O3

Microstructure and Properties of TiAl Composite Coatings Prepared by Laser Cladding under Multi-Phase beta(0)/CoAl2Ti Phase Strengthening

Microstructure and Wear Resistance of Ti6Al4V Titanium Alloy Laser-Clad Ni60/WC Composite Coating