Abstract:In this study, the surface of (Ti-6Al-4V)TC4 alloy was modified via laser cladding. The elemental composition of the coating was (TiAl)95−xCu5Nix, with Ni as the variable (where x = 0, 3, 6, and 9 at.%). Multi-principal alloy coatings were successfully prepared, and their constituent phases, microstructures, and chemical compositions were thoroughly investigated. The hardness and wear resistance of the coatings were analyzed, and the compositions and interfacial characteristics of the different phases were examined via transmission electron microscopy. The analysis revealed that Ni formed a solid solution and a eutectic structure in the Ti(Al, Cu)2 phase. These findings provide valuable insights into the coating properties. Moreover, reciprocal dry sliding friction experiments were conducted to investigate the wear mechanism. The results revealed a significant increase in wear resistance owing to the formation of a Ni solid solution and changes in the coating structure. Additionally, tensile tests demonstrated that the tensile strength of the coatings initially increased and then decreased with varying Ni content. By combining these results with various analyses, we determined that the coating exhibited optimal properties at a Ni content of 6 at.%. Overall, this study comprehensively investigated the microstructure and phase transition behavior of these coatings through various analytical techniques. These findings provide valuable guidance for further optimizing both the preparation process and the performance of the coatings. The coatings exhibit excellent wear resistance and could inspire the design of more advanced protective surfaces.

Microstructure and wear properties of TiCN/Ti coatings on titanium alloy by laser cladding

Microstructure and Wear Resistance of Laser Clad TiB–TiC/TiNi–Ti2Ni Intermetallic Coating on Titanium Alloy

Microstructures and Wear Properties of TiC Coating Produced by Laser Cladding on Ti-6Al-4V with TiC and Carbon Nanotube Mixed Powders

Microstructure and properties of Ti/TiBCN coating on 7075 aluminum alloy by laser cladding

Microstructure and Wear Resistance of Laser Cladding TiC Coat on Titanium Alloy

Microstructure and Wear Resistance of Ti6Al4V Titanium Alloy Laser-Clad Ni60/WC Composite Coating

Fabrication of Tic Reinforced Ni Based Coating by Laser Cladding

Microstructure and properties of pure titanium coating on Ti-6Al-4V alloy by laser cladding

Wear resistance of laser cladding coating onto titanium alloy substrate

Microstructure, High-Temperature Wear Resistance, and Corrosion Resistance of Laser Cladded Co-Based Coating

Microstructure and performance of Ti-based wear-resistant laser cladding coatings with rare-earth oxides

Wear resistance of laser clad TiC/Ti-Ti2 Co coating on titanium alloy

Study on fabrication of multi-phase reinforcement coatings on Ti6Al4V by laser cladding for enhanced tribological performance

Laser Cladding Nicocraly Coating on Ti-6al4v

Microstructure and Wear Resistance of In Situ Synthesized Ti(C, N) Ceramic-Reinforced Nickel-Based Coatings by Laser Cladding

Influence of microstructures and wear behaviors of the microalloyed coatings on TC11 alloy surface using laser cladding technique

Microstructures and properties of TiN reinforced Co-based composite coatings modified with Y2O3 by laser cladding on Ti–6Al–4V alloy

Microstructure and wear resistance of laser clad composite coating on TC4 titanium alloy surface

Microstructure and Friction Wear Properties of TiC Laser Clad Layer

Microstructure and Mechanical Properties of a Ti-6Al-4V Titanium Alloy Subjected to Laser Cladding

Microstructural and Performance Analysis of (TiAl)95−xCu5Nix Coatings Prepared via Laser Surface Cladding on Ti–6Al–4V Substrates