Abstract:TiB/TiC-reinforced titanium matrix composite coatings were prepared by laser cladding on Ti6Al4V substrates. The effects of the addition of Y2O3 on the microstructure, microhardness, fracture toughness, and dry sliding wear resistance of the coatings were investigated. Microstructural observation showed that the coatings mainly consisted of TiC and TiB particles uniformly dispersed in the coarse cellular dendrites and interdendritic eutectic structure. The addition of Y2O3 refined the structure of the primary phase, improved the microstructural uniformity, and increased the volume fraction of TiC. The average microhardness of the coatings was improved from HV 725.30 to HV 812.98, and the average fracture toughness was increased from 8.32MPam1/2 to 17.36MPam1/2. The coating with Y2O3 had excellent resistance to micro-cutting and cracking. Analyses of the initial worn surfaces showed that the coating with Y2O3 was covered with a thin tribolayer, which consisted of Fe and its oxides. The true worn surfaces of the coating with Y2O3 were smoother than that of the coating without Y2O3 due to the protection by the tribolayer. Analyses of the cross-sections from the wear tracks revealed that the surface of the coating without Y2O3 was covered with many fine cracks which caused the debonding of the fragments from the surface of the coating. The wear mechanism of the coating with Y2O3 was defined as oxidative wear. Measurement results of the worn mass loss and friction coefficient values further verified the positive effect of Y2O3 on the improvement of wear resistance.

Microstructure and Properties of WC Reinforced Ni-based Composite Coatings with Y2O3 Addition on Titanium Alloy by Laser Cladding

Microstructures and properties of TiN reinforced Co-based composite coatings modified with Y2O3 by laser cladding on Ti–6Al–4V alloy

Research of Ni/WC Composite Coatings on TC4 titanium Alloy by Laser Cladding

Microstructure and Wear Resistance of Ti6Al4V Titanium Alloy Laser-Clad Ni60/WC Composite Coating

Characterization of Laser Cladding Wc-Ti Composite Coatings

Microstructural Evolution and Abrasive Resistance of WC7Co Ceramic Particle-Reinforced Ti6Al4V Composite Coating Prepared by Pulse Laser Cladding

Effect of WC addition on microstructure and properties of laser melting deposited Ti6Al4V

Microstructure evolution and tribological behavior of laser cladded Al 1.8 CrCuFeNi 2 /WC composite coatings on Ti-6Al-4 V

Effect of SiC and TiC content on microstructure and wear behavior of Ni-based composite coating manufactured by laser cladding on Ti-6Al-4V

Microstructure and wear resistance of laser clad composite coating on TC4 titanium alloy surface

Influence of Y2O3 addition on the microstructure of TiC reinforced Ti-based composite coating prepared by laser cladding

Microstructure and wear properties of TiCN/Ti coatings on titanium alloy by laser cladding

Effect of laser power on microstructure and properties of Ti-Al/WC composite coatings

Effect of Y2O3 on the sliding wear resistance of TiB/TiC-reinforced composite coatings fabricated by laser cladding

Process optimization, microstructure characterization, and tribological performance of Y 2 O 3 modified Ti6Al4V-WC gradient coating produced by laser cladding

Microstructure and tribological properties of laser cladded TiC reinforced WC-10Co4Cr coatings at 500 °C

Microstructure and element distribution of laser cladding TiC -reinforced CrTi4-based composite coating with CeO2/Ce2O3

EFFECT OF Y2O3 ON MICROSTRUCTURES AND WEAR RESISTANCE OF TiC REINFORCED Ti-Al-Si COATING BY LASER CLADDING ON TC4 ALLOY

Effects of Ti/Nb Dual-Element Addition on the Microstructure and Properties of Tungsten Carbide-Reinforced Laser Cladding Coatings

Microstructure and high-temperature properties of Fe-Ti-Cr-Mo-B-C-Y2O3 laser cladding coating

Microstructure and Wear Resistance of Laser Cladding nano TiC/micro TiB2/C-276 Composite Coatings on 316L Stainless Steel