Abstract:The micro-electro-mechanical system (MEMS) resonator developed based on surface processing technology usually changes the section shape either due to excessive etching or insufficient etching. In this paper, a section parameter is proposed to describe the microbeam changes in the upper and lower sections. The effect of section change on the mechanical properties is studied analytically and verified through numerical and finite element solutions. A doubly-clamped microbeam-based resonator, which is actuated by an electrode on one side, is investigated. The higher-order model is derived without neglecting the effects of neutral plane stretching and electrostatic nonlinearity. Further, the Galerkin method and Newton⁻Cotes method are used to reduce the complexity and order of the derived model. First of all, the influence of microbeam shape and gap variation on the static pull-in are studied. Then, the dynamic analysis of the system is investigated. The method of multiple scales (MMS) is applied to determine the response of the system for small amplitude vibrations. The relationship between the microbeam shape and the frequency response is discussed. Results show that the change of section and gap distance can make the vibration soften, harden, and so on. Furthermore, when the amplitude of vibration is large, the frequency response softening effect is weakened by the MMS. If the nonlinearity shows hardening-type behavior at the beginning, with the increase of the amplitude, the frequency response will shift from hardening to softening behavior. The large amplitude in-well motions are studied to investigate the transitions between hardening and softening behaviors. Finally, the finite element analysis using COMSOL software (COMSOL Inc., Stockholm, Sweden) is carried out to verify the theoretical results, and the two results are very close to each other in the stable region.

A New Scheme to Enhance/Decrease Sensitivity of a Mems Resonator Using Parametric Modulation

On Enhancing the Sensitivity of Resonant Thermometers Based on Parametric Modulation

On Weakly Coupled Resonant MEMS Transducers Operating in the Modal Overlap Regime

A Wide Range Frequency Coherent Modulation Control Based on Modal Coupling Effect in MEMS Resonators

Significant tuning of internal mode coupling in doubly clamped MEMS beam resonators by thermal effect

Improving the Dynamic Range and Resolution of Mems Resonant Sensors Utilizing Nonlinear Cancellation

A MEMS Frequency Modulation Electrometer Based on Pre-Bias Charge Mechanism to Enhance Performance

Sensitivity Enhancement of Nonlinear Micromechanical Sensors Using Parametric Symmetry Breaking

Exploiting Nonlinearity to Enhance the Sensitivity of Mode-Localized Mass Sensor Based on Electrostatically Coupled MEMS Resonators

A MODE-LOCALIZED MEMS ACCELEROMETER IN THE MODAL OVERLAP REGIME EMPLOYING PARAMETRIC PUMP

Modal Coupling Effect in a Novel Nonlinear Micromechanical Resonator

Multi-modal resonance measurement capable of discerning and visualizing effects due to excitation schemes in mems resonator

Dispersive Resonance Modulation Based on the Mode-Coupling Effect in a Capacitive Micromechanical Resonator

High Sensitivity Micro Electrometer Based On Clamped Free Curved Beams Resonator With Weakened Nonlinearity

Gap adjustable MEMS comb resonator

Multiple Parameter Decoupling Using a Single Resonant MEMS Sensor Via Blue Sideband Excitation

A Sensor for Stiffness Change Sensing Based on Three Weakly Coupled Resonators with Enhanced Sensitivity

A Novel Design of a MEMS Resonant Accelerometer with Adjustable Sensitivity

Static and Dynamic Mechanical Behaviors of Electrostatic MEMS Resonator with Surface Processing Error

Energy Transfer Control of Mode Cooling Induced by Capacitive Nonlinear Coupling in MEMS Resonator

A Three Degree-Of-Freedom Weakly Coupled Resonator Sensor with Enhanced Stiffness Sensitivity