Abstract:Electrochemical seismic sensors are key components in monitoring ground vibration, which are featured with high performances in the low-frequency domain. However, conventional electrochemical seismic sensors suffer from low repeatability due to limitations in fabrication and limited bandwidth. This paper presents a micro-fabricated electrochemical seismic sensor with a force-balanced negative feedback system, mainly composed of a sensing unit including porous sensing micro electrodes immersed in an electrolyte solution and a feedback unit including a feedback circuit and a feedback magnet. In this study, devices were designed, fabricated, and characterized, producing comparable performances among individual devices. In addition, bandwidths and total harmonic distortions of the proposed devices with and without a negative feedback system were quantified and compared as 0.005-20 (feedback) Hz vs. 0.3-7 Hz (without feedback), 4.34 ± 0.38% (without feedback) vs. 1.81 ± 0.31% (feedback)@1 Hz@1 mm/s and 3.21 ± 0.25% (without feedback) vs. 1.13 ± 0.19% (feedback)@5 Hz@1 mm/s (ndevice = 6, n represents the number of the tested devices), respectively. In addition, the performances of the proposed MEMS electrochemical seismometers with feedback were compared to a commercial electrochemical seismic sensor (CME 6011), producing higher bandwidth (0.005-20 Hz vs. 0.016-30 Hz) and lower self-noise levels (-165.1 ± 6.1 dB vs. -137.7 dB at 0.1 Hz, -151.9 ± 7.5 dB vs. -117.8 dB at 0.02 Hz (ndevice = 6)) in the low-frequency domain. Thus, the proposed device may function as an enabling electrochemical seismometer in the fields requesting seismic monitoring at the ultra-low frequency domain.

High Sensitivity Micro Electrometer Based On Clamped Free Curved Beams Resonator With Weakened Nonlinearity

A Novel Triangular-Electrode Based Capacitive Sensing Method for MEMS Resonant Devices

Ultrasensitive charge detection utilizing coupled nonlinear micromechanical resonators

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Highly Sensitive Lateral Deformable Optical MEMS Displacement Sensor: Anomalous Diffraction Studied by Rigorous Coupled-Wave Analysis.

Sensitivity Manipulation on Micro-Machined Resonant Electrometer Toward High Resolution and Large Dynamic Range

A MEMS Frequency Modulation Electrometer Based on Pre-Bias Charge Mechanism to Enhance Performance

Electrostatic Charge Sensor Based on Micro Resonator with Sensing Scheme of Effective Stiffness Perturbation

A Micro Resonant Charge Sensor with Enhanced Sensitivity Based on Differential Sensing Scheme and Leverage Mechanisms

High-Resolution and Large Dynamic Range Electrometer with Adjustable Sensitivity Based on Micro Resonator and Electrostatic Actuator

A Highly Sensitive and High-Resolution Resonant MEMS Electrostatic Field Microsensor Based on Electrostatic Stiffness Perturbation

Enhanced linearity through high-order antisymmetric vibration for MEMS DC power sensor

A MEMS Resonant Accelerometer with High Relative Sensitivity Based on Sensing Scheme of Electrostatically Induced Stiffness Perturbation

High Sensitivity Optical MEMS Accelerometer Based on a Metal Fabry–Pérot Microcavities Wavelength Modulation System

Ultrasensitive Resonant Electrometry Utilizing Micromechanical Oscillators

A micromachined resonant accelerometer

A MEMS Resonant Accelerometer with Sensitivity Enhancement and Adjustment Mechanisms

Electrostatic Charge Sensor Based on a Micromachined Resonator with Dual Micro-Levers

Mechanical Nonlinearity Elimination with a Micromechanical Clamped-Free Semicircular Beams Resonator

An Electrochemical, Low-Frequency Seismic Micro-Sensor Based on MEMS with a Force-Balanced Feedback System

Design of a Hybrid Micro/Nano Cantilever-based Resonant Sensor and its Fabrication Method