Abstract:The ultrahigh static displacement-acceleration sensitivity of a mechanical sensing chip is essential primarily for an ultra-sensitive accelerometer. In this paper, an optimal design to implement to a single-axis MOEMS accelerometer consisting of a grating interferometry cavity and a micromachined sensing chip is presented. The micromachined sensing chip is composed of a proof mass along with its mechanical cantilever suspension and substrate. The dimensional parameters of the sensing chip, including the length, width, thickness and position of the cantilevers are evaluated and optimized both analytically and by finite-element-method (FEM) simulation to yield an unprecedented acceleration-displacement sensitivity. Compared with one of the most sensitive single-axis MOEMS accelerometers reported in the literature, the optimal mechanical design can yield a profound sensitivity improvement with an equal footprint area, specifically, 200% improvement in displacement-acceleration sensitivity with moderate resonant frequency and dynamic range. The modified design was microfabricated, packaged with the grating interferometry cavity and tested. The experimental results demonstrate that the MOEMS accelerometer with modified design can achieve the acceleration-displacement sensitivity of about 150 mu m/g and acceleration sensitivity of greater than 1500V/g, which validates the effectiveness of the optimal design.

High Sensitivity Optical MEMS Accelerometer Based on a Metal Fabry–Pérot Microcavities Wavelength Modulation System

Monolithic Integrated Cavity Optomechanical Accelerometer Based on Push-Pull Photonic Crystal Zipper Cavity

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Optical Design and Analysis of a High Resolution MOEMS Accelerometer Based on Diffraction Grating

A MOEMS Accelerometer Based on Diffraction Grating with Improved Mechanical Structure.

A Novel Scheme Design of a High-G Optical NEMS Accelerometer Based on a Single Chip Grating with Proper Sensitivity and Large Bandwidth

Design and Modification of a High-Resolution Optical Interferometer Accelerometer

A MEMS Based Fabry–Pérot Accelerometer with High Resolution

The Design and Simulation of a Coarse-to-Fine Optical MEMS Accelerometer

A Proposal for a High-Sensitivity Optical MEMS Accelerometer With a Double-Mode Modulation System

Broadband Optomechanical Accelerometer Reaching the Thermomechanical Limit Based on Suspended Si3N4 Membrane Resonator

A New High-Precision Micro-Accelerometer Based on Optomechanical System

Design and Demonstration of an In-Plane Micro-Optical-Electro-Mechanical-System Accelerometer Based on Talbot Effect of Dual-Layer Gratings

A High-sensitivity Optical MEMS Accelerometer Based on SOI Double-side Micromachining

A microchip optomechanical accelerometer

A Seismic-Grade Optical MEMS Accelerometer with Force Feedback Control

Optical Interferometric MEMS Accelerometers

Structure Design of a High-Sensitivity MOEMS Accelerometer

Closed-Loop MOEMS Accelerometer

Optimal design of high sensitive integrated optical accelerometer