Abstract:Three different nitrogenous interlayers including 1,4‐bis(2‐hydroxyethyl) piperazine, polyethylenimine ethoxylated, and polyethylenimine are studied to modify indium tin oxide (ITO) source/drain electrodes. Verified by first‐principle calculations and element analysis, the protonated amines are responsible for the decrease of ITO surface work function. N‐type organic thin film transistors with maximum field‐effect mobility of 1.95 cm2 V−1 s−1 are achieved. The commercialization of organic thin film transistors (OTFTs) is partly hindered by the high cost and stubborn work function (WF) of common Au source/drain (S/D) electrodes. In this work, indium tin oxide (ITO) S/D electrodes modified with three different nitrogenous interlayers including 1,4‐bis(2‐hydroxyethyl) piperazine (HEP), polyethylenimine ethoxylated (PEIE), and branched polyethylenimine (PEI) are adopted to fabricate n‐type OTFTs. The WF of bare ITO is 4.7 eV, whereas ITO modified with nitrogenous interlayers exhibits WFs ranging from 4.1 to 3.6 eV. By the first‐principle calculation and element analysis, the protonated amines are critical for the reduction of ITO surface WF. Besides, the interlayers with higher nitrogen contents are more likely to improve the wettability of octadecyltrichlorosilane (OTS) modified ITO substrates, and help to gain the continuous and oriented poly[2,5‐bis(4‐tetradecyloctadecyl)pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione‐alt‐5,5′‐di(thiophen‐2‐yl)‐2,2′‐(E)‐1,2‐bis(3,4‐difluorothien‐2‐yl)‐ethene] (P4FTVT‐C32) semiconductor thin films. Therefore, P4FTVT‐C32 based OTFTs with maximum electron field‐effect mobility of 1.95 cm2 V−1 s−1 are achieved by PEI treatments. These results indicate that the ITO S/D electrodes modified by nitrogenous interlayers can greatly slash costs and promote commercialization of OTFTs.

Electron Injection Improvement of n-Type Organic Field-Effect Transistors With Indium Contact Interlayer

High performance n-channel thin-film field-effect transistors based on angular-shaped naphthalene tetracarboxylic diimides

Improving Ideality of P‐Type Organic Field‐Effect Transistors via Preventing Undesired Minority Carrier Injection

Recent progress in the development of n-type organic semiconductors for organic field effect transistors

High-Performance n-type Polymer Field-effect Transistors with Exceptional Stability

Improving Electron Injection of Organic Light-Emitting Transistors via Interface Layer Design

Nitrogenous Interlayers for ITO S/D Electrodes in N‐Type Organic Thin Film Transistors

Performance enhancement of p-type organic field-effect transistor through introducing organic buffer layers

Complementary Inverter Based on n‐Type and p‐Type OFETs with the Same Ambipolar Organic Semiconductor and ITO S/D Electrodes

Improving the Performance of Organic Thin-Film Transistor with a Doped Interlayer

Improved Electron Transport with Reduced Contact Resistance in N-Doped Polymer Field-Effect Transistors with a Dimeric Dopant

Improving Charge Injection for Organic Field‐Effect Transistor Array via Chemical Functionalized Van der Waals Top‐Contacts

Oxygen-Induced Barrier Lowering for High-Performance Organic Field-Effect Transistors

Enhanced Performance of Organic Field‐Effect Transistor with Bi‐Functional N‐Type Organic Semiconductor Layer

High-performance InSe Transistors with Ohmic Contact Enabled by Nonrectifying-barrier-type Indium Electrodes

N-Type Organic Semiconductors in Organic Electronics

Reduction of charge injection barrier by 1-nm contact oxide interlayer in organic field effect transistors

Reduced contact resistance in top-contact organic field-effect transistors by interface contact doping

Air- and Active Hydrogen-Induced Electron Trapping and Operational Instability in n-Type Polymer Field-Effect Transistors

Highly Enhanced Charge Injection in Thienoacene-Based Organic Field-Effect Transistors with Chemically Doped Contact

On the Nature of Charge-Injecting Contacts in Organic Field-Effect Transistors