Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Complementary Inverter Based on n‐Type and p‐Type OFETs with the Same Ambipolar Organic Semiconductor and ITO S/D Electrodes

Vertical Organic Electrochemical Transistors for Complementary Circuits

Achieving Unipolar Organic Transistors for Complementary Circuits by Selective Usage of Doped Organic Semiconductor Film Electrodes

Flexible complementary circuits operating at sub-0.5 V via hybrid organic–inorganic electrolyte-gated transistors

Ambipolar Organic Field‐Effect Transistors and Complementary Circuits Based on Single Crystals with Alcohol Treatment

Low-power organic field-effect transistors and complementary inverter based on low-temperature processed Al2O3 dielectric

Nitrogenous Interlayers for ITO S/D Electrodes in N‐Type Organic Thin Film Transistors

High-performance Inverters Based on Ambipolar Organic-Inorganic Heterojunction Thin-Film Transistors

Wafer‐Scale Organic Complementary Inverters Fabricated with Self‐Assembled Monolayer Field‐Effect Transistors

Printed dual-gate organic thin film transistors and PMOS inverters on flexible substrates: role of top gate electrode

Combining Bottom-Up and Top-Down Segmentation: A Way to Realize High-Performance Organic Circuit

Organic Single-Crystal Complementary Inverter

Editorial: High-Performance Organic Thin-Film Transistors

Polyethylene glycol-decorated n-type conducting polymers with improved ion accessibility for high-performance organic electrochemical transistors

One-volt oxide based complementary circuit

A high-performance organic thin-film transistor with Parylene/PMMA bilayer insulation based on P3HT

All‐Solution‐Processed, All‐Organic Flexible Transistor and Circuit Based on Dry‐Transfer Polymer Films

Fully Printed High-Performance n-Type Metal Oxide Thin-Film Transistors Utilizing Coffee-Ring Effect

Heterogeneous Integration of Atomically-Thin Indium Tungsten Oxide Transistors for Low-Power 3D Monolithic Complementary Inverter

Electrostatically-sprayed carbon electrodes for high performance organic complementary circuits

Dry Lithography Patterning of Monolayer Flexible Field Effect Transistors by 2D Mica Stamping