Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Ambipolar Organic Field‐Effect Transistors and Complementary Circuits Based on Single Crystals with Alcohol Treatment

A Transfer Method for High‐Mobility, Bias‐Stable, and Flexible Organic Field‐Effect Transistors

Vertical Organic Electrochemical Transistors for Complementary Circuits

Organic Single-Crystal Complementary Inverter

Achieving Unipolar Organic Transistors for Complementary Circuits by Selective Usage of Doped Organic Semiconductor Film Electrodes

Interface Collaborative Strategy for High Mobility Organic Single‐Crystal Field‐Effect Transistors with Ideal Current–Voltage Curves

p-n heterojunctions composed of two-dimensional molecular crystals for high-performance ambipolar organic field-effect transistors

Editorial: High-Performance Organic Thin-Film Transistors

High-performance Ambipolar Field-effect Transistors with Ph-BTBT-10/PMMA/ZnO structure

Crystallized Monolayer Semiconductor for Ohmic Contact Resistance, High Intrinsic Gain, and High Current Density

A soluble and air-stable organic semiconductor with high electron mobility

Liquid Crystal-Like Active Layer for High-Performance Organic Field-Effect Transistors

Complementary Inverter Based on n‐Type and p‐Type OFETs with the Same Ambipolar Organic Semiconductor and ITO S/D Electrodes

Ambipolar, High Performance, Acene-Based Organic Thin Film Transistors.

Organic Cocrystal based on Phthalocyanine with Ideal Packing Mode towards High-Performance Ambipolar Property

Semiconductor/dielectric Interface in Organic Field-Effect Transistors: Charge Transport, Interfacial Effects, and Perspectives with 2D Molecular Crystals

Improving Electron Injection of Organic Light-Emitting Transistors via Interface Layer Design

Well‐Balanced Ambipolar Organic Single Crystals toward Highly Efficient Light‐Emitting Devices

Improving Charge Injection for Organic Field‐Effect Transistor Array via Chemical Functionalized Van der Waals Top‐Contacts

Patterning Liquid Crystalline Organic Semiconductors via Inkjet Printing for High‐Performance Transistor Arrays and Circuits

Interfacial Flat-Lying Molecular Monolayers for Performance Enhancement in Organic Field-Effect Transistors