Abstract:Selective catalytic reduction (SCR) technology plays a crucial role in flue gas denitration. The nonuniform distribution of catalyst inlet parameters causes the nonuniform distribution of NO concentration at the outlet, thus affecting accuracy of ammonia injection. Regarding this issue, this paper describes the impacts of nonuniform velocity and temperature on both the confidence of NO concentration measured at a single measuring point at the outlet and the denitration efficiency, which can provide a basis for structural optimization of SCR denitration reactor and decrease in ammonia slip. The random distribution form of velocity and temperature above the catalyst layer are derived from the actual gas volume and the actual SCR reactor model, and then the catalyst inlet boundary conditions were generated with different relative standard deviation of velocity and temperature accordingly. The confidence of outlet NO concentration measurement results can be counted by means of Monte Carlo simulation. Finally, the relation model can be obtained to calculate the confidence of outlet NO concentration measurement results at different working conditions. The results show that within the gas volume range of this work, in order to ensure the confidence of the NO concentration measurement results, the relative standard deviation of temperature before the catalyst inlet must be within 0.005 and the relative standard deviation of velocity before the catalyst inlet must be within 0.1. With the increase in relative standard difference in temperature, there is a slight decrease in the efficiency of denitration. With the different mean value of temperature, the variation range of denitration efficiency is similar to that of temperature-relative standard difference. With the different mean value of velocity, the deviation range of corresponding efficiency is similar to that of the temperature-relative standard difference. When the relative standard difference in velocity increases, the denitration efficiency decreases slightly. The greater velocity value, the decreasing range of denitration efficiency is larger than the variation range of relative standard difference in velocity.

Precise ammonia injection strategy in SCR denitrification system based on non-uniform inlet parameters

Optimizing Flow Field in an SCR System of a 600 MW Power Plant: Effects of Static Mixer Alignment Style

Fluid Mixing Optimization Strategy of Catalytic Reactor for Marine SCR System

Optimization of Ammonia Injection Grid in Hybrid Selective Non-Catalyst Reduction and Selective Catalyst Reduction System to Achieve Ultra-Low NOx Emissions

Influence of Non-uniform Distributions of Inlet Velocity and Reductant on SCR DeNOx Performance

Experiment and Simulation of Ammonia Distribution Uniformity for Diesel Engine Urea-SCR

Numerical Simulation on Optimization of SCR Denitrification System for Coal-fired Boilers

NEW TYPE VORTEX AMMONIA-SPRAYING AND MIXING FACILITY USED FOR DENITRIFICATION SYSTEM AS WELL AS NUMERICAL SIMULATION OF THE FLOW FIELD

Effect of Catalyst Inlet Flow Field Distribution Characteristics on Outlet NO Concentration Distribution in SCR Denitration Reactor Based on Monte Carlo Method

Urea Injection and Uniformity of Ammonia Distribution in SCR System of Diesel Engine

Numerical study of mixing characteristic between flue and droplet at 410t/h coal-fired boiler SNCR system

Estimation of Ammonia Storage Nonuniformity for Urea-Based Selective Catalytic Reduction Systems

Anticipatory NH3 injection control for SCR system based on the prediction of the inlet NOx concentration

CFD analysis of influencing factors on SCR denitration efficiency of sintering flue gas based on response surface methodology

Numerical Simulation and Optimization of SNCR System for CFB Boilers

Research on Control Strategy of Internal-Loop Airlift Reactor for Shortcut Nitrification

Modeling the Effect of Nonuniformities from Urea Injection on SCR Performance Using CFD

Mixing Performance of Preheated Flue Gas Entering Selective Catalytic Reactor under Low Loads

Control Strategy of Shortcut Nitrification.

Denitration Simulation of SNCR System Nozzles at Different Layout Positions in Coal Powder Boilers

Design and Numerical Simulation Study of Diesel Engine Urea-SCR System's Mixer