Abstract:Solid-oxide fuel cells (SOFCs) technology has a substantial potential in the application of clean and efficient electric power generation. However, the widespread utilization of SOFCs has not been realized because the cost associated with cell fabrication, materials and maintenance is still too high. To increase its competitiveness, lowering the operation temperature to the intermediate range of around 500–800°C is one of the main goals in current SOFCs research. A major challenge is the development of cell materials with acceptably low ohmic and polarization losses to maintain sufficiently high electrochemical activity at reduced temperatures. During the past few decades, tremendous progress has been made in the development of cell materials and stack design, which have been recently reviewed. SOFCs are fabricated from ceramic or cermet powders. The performances of SOFCs are also closely related to the ways in which the cell materials are processed. Therefore, the optimization of synthetic processes for such materials is of great importance. The conventional solid-phase reaction method of synthesizing SOFCs materials requires high calcination and sintering temperatures, which worsen their microstructure, consequently, their electrochemical properties. Various wet chemical routes have recently been developed to synthesize submicro- to nano-sized oxide powders. This paper provides a comprehensive review on the advanced synthesis of materials for intermediate-temperature SOFCs and their impact on fuel cell performance. Combustion, co-precipitation, hydrothermal, sol–gel and polymeric-complexing processes are thoroughly reviewed. In addition, the parameters relevant to each synthesis process are compared and discussed. The effect of different processes on the electrochemical performance of the materials is evaluated and optimization of the synthesis processes is discussed and some emerging synthetic techniques are also briefly presented.

Progresses on Fabricating of Electrolyte Thin Films for SOFCs

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Electrophoretic Deposition in the Preparation of Electrolyte Thin Films for Solid Oxide Fuel Cells

Preparation of Thin Electrolyte Film Via Dry Pressing/heating/ Quenching/calcining for Electrolyte-Supported SOFCs

Manufacture of Electrolyte Component of SOFC

Electrolyte material progress of low-temperature SOFC

Fabrication and Performance of Anode-Supported Electrolyte Thin Films SOFCs

A Facile and Environment-Friendly Method to Fabricate Thin Electrolyte Films for Solid Oxide Fuel Cells

Alternative preparation methods of thin films for solid oxide fuel cells: review

Preparation of anode supported thin electrolytes for IT-SOFCS

Fabrication and Properties of Anode-Supported Solid Oxide Fuel Cell

Research Progress on Preparation of Key Materials in SOFC by Electrophoretic Deposition

Nanocrystal Engineering of Thin-Film Yttria-Stabilized Zirconia Electrolytes for Low-Temperature Solid-Oxide Fuel Cells

A review of thin film electrolytes fabricated by physical vapor deposition for solid oxide fuel cells

Recent Advances to the Development of Low‐Temperature Solid Oxide Fuel Cells

Fabrication and Characterizations of Ysz Electrolyte Films for Sofc

Intermediate Temperature Solid Oxide Fuel Cell with Lscf-GDC Nanofiber Cathode by Electrophoretic Deposition

A review on materials, advantages, and challenges in thin film based solid oxide fuel cells

Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells

Fabrication and Characterization of Composite Electrolyte for Intermediate-Temperature SOFC

Scalable and facile fabrication of tri-layer electrolytes by reactive sputtering for efficient and durable solid oxide fuel cells