Abstract:Solid oxide fuel cells (SOFCs) as one of the clean electrochemical energy conversion devices have acquired increasing attention recently due to the high efficiency, low emission, and excellent fuel flexibility. Nevertheless, the practical application of SOFCs is hindered by poor stability and high cost. Thus, lowering the operating temperatures is critical to increase the lifetime and reduce the cost of SOFCs. However, the electrolyte and electrode materials used in high-temperature SOFCs suffer from insufficient ionic conductivity and poor electrocatalytic activity at lower operating temperatures, respectively. Nanomaterials and relevant nanotechnologies have great potential to enhance the performance of SOFCs operated at lower temperatures because of the enlarged surface area, distinct surface, and interface properties. Among various nanotechnologies, pulsed laser deposition (PLD) has been widely employed in SOFCs to reduce the operating temperature. Herein, we present an in-time review about the PLD-involved fabrication of key components in intermediate-temperature (IT) SOFCs in terms of cathodes, electrolytes, anodes, and interlayers. The superiority of the PLD technique to other traditional fabrication methods is emphasized, and design strategies for the key components in IT-SOFCs are presented and discussed. We also point out the trends, current challenges, and future directions that exist in this dynamic field. This review will inspire substantial interests from various disciplines and provide some valuable guidance for future development of PLD-involved energy storage and conversion devices.This article has not yet been cited by other publications.

A review of thin film electrolytes fabricated by physical vapor deposition for solid oxide fuel cells

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Advances in solid oxide fuel cell electrolyte fabrication by pulsed laser deposition

Electrophoretic Deposition in the Preparation of Electrolyte Thin Films for Solid Oxide Fuel Cells

Scalable and facile fabrication of tri-layer electrolytes by reactive sputtering for efficient and durable solid oxide fuel cells

Recent advances on electrolyte materials for SOFC: A review

Nanocrystal Engineering of Thin-Film Yttria-Stabilized Zirconia Electrolytes for Low-Temperature Solid-Oxide Fuel Cells

Advances in Ceramic Thin Films Fabricated by Pulsed Laser Deposition for Intermediate-Temperature Solid Oxide Fuel Cells

Recent progress of perovskite-based electrolyte materials for solid oxide fuel cells and performance optimizing strategies for energy storage applications

The fabrication technique of YSZ electrolyte film

Preparation of Thin Electrolyte Film Via Dry Pressing/heating/ Quenching/calcining for Electrolyte-Supported SOFCs

Alternative preparation methods of thin films for solid oxide fuel cells: review

A new solid oxide fuel cell design based on thin film electrolytes

Review of solid oxide fuel cell materials: cathode, anode, and electrolyte

Review of the electrolyte materials in medium or low temperature solid oxide fuel cell

3D Printing of Robust 8YSZ Electrolytes with a Hyperfine Structure for Solid Oxide Fuel Cells

Fabrication of nanoscale yttria stabilized zirconia for solid oxide fuel cell

Research on electrolytes for solid oxide fuel cell

Opportunities, Challenges and Prospects for Electrodeposition of Thin-Film Functional Layers in Solid Oxide Fuel Cell Technology

Low temperature solid oxide electrolytes (LT-SOE): A review

A review on materials, advantages, and challenges in thin film based solid oxide fuel cells