Abstract:Solid-oxide fuel cells (SOFCs) technology has a substantial potential in the application of clean and efficient electric power generation. However, the widespread utilization of SOFCs has not been realized because the cost associated with cell fabrication, materials and maintenance is still too high. To increase its competitiveness, lowering the operation temperature to the intermediate range of around 500–800°C is one of the main goals in current SOFCs research. A major challenge is the development of cell materials with acceptably low ohmic and polarization losses to maintain sufficiently high electrochemical activity at reduced temperatures. During the past few decades, tremendous progress has been made in the development of cell materials and stack design, which have been recently reviewed. SOFCs are fabricated from ceramic or cermet powders. The performances of SOFCs are also closely related to the ways in which the cell materials are processed. Therefore, the optimization of synthetic processes for such materials is of great importance. The conventional solid-phase reaction method of synthesizing SOFCs materials requires high calcination and sintering temperatures, which worsen their microstructure, consequently, their electrochemical properties. Various wet chemical routes have recently been developed to synthesize submicro- to nano-sized oxide powders. This paper provides a comprehensive review on the advanced synthesis of materials for intermediate-temperature SOFCs and their impact on fuel cell performance. Combustion, co-precipitation, hydrothermal, sol–gel and polymeric-complexing processes are thoroughly reviewed. In addition, the parameters relevant to each synthesis process are compared and discussed. The effect of different processes on the electrochemical performance of the materials is evaluated and optimization of the synthesis processes is discussed and some emerging synthetic techniques are also briefly presented.

Recent advances on electrolyte materials for SOFC: A review

Review of solid oxide fuel cell materials: cathode, anode, and electrolyte

Solid oxide fuel cell: Materials for anode, cathode and electrolyte

Fabrication of nanoscale yttria stabilized zirconia for solid oxide fuel cell

Review of the electrolyte materials in medium or low temperature solid oxide fuel cell

A brief review on ceria based solid electrolytes for solid oxide fuel cells

A review on materials, advantages, and challenges in thin film based solid oxide fuel cells

Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating below 500 °C

Recent progress of perovskite-based electrolyte materials for solid oxide fuel cells and performance optimizing strategies for energy storage applications

A tutorial review on solid oxide fuel cells: fundamentals, materials, and applications

Nanostructured Materials for Enhanced Performance of Solid Oxide Fuel Cells: A Comprehensive Review

Solid oxide fuel cell: Decade of progress, future perspectives and challenges

Advances in Cathode Materials for Solid Oxide Fuel Cells: Complex Oxides without Alkaline Earth Metal Elements

Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells

Recent advances and influencing parameters in developing electrode materials for symmetrical solid oxide fuel cells

Recent advancements, doping strategies and the future perspective of perovskite-based solid oxide fuel cells for energy conversion

Research on electrolytes for solid oxide fuel cell

Low temperature solid oxide electrolytes (LT-SOE): A review

Recent Progress in the Design, Characterisation and Application of LaAlO3- and LaGaO3-Based Solid Oxide Fuel Cell Electrolytes

Progress in proton‐conducting oxides as electrolytes for low‐temperature solid oxide fuel cells: From materials to devices

Latest development of double perovskite electrode materials for solid oxide fuel cells: a review