Abstract:As is well known, a solid oxide fuel cell(SOFC) is a device that can convert chemical energy directly into electrical energy. The possibility to grow thin films of oxide materials is of great importance in the development of SOFC. Recently, it is expected that oxide heterostructures, with almost ideal interfaces, should lead to the interesting artificial materials with some novel properties. So we have prepared superlattice electrolyte thin films.On the MgO single-crystal substrates, multilayer epitaxial thin-film heterostructures of 20 mol% samarium-oxide-doped ceria (Ce0.8Sm0.2O2-, SDC) and 8 mol% yttria-stabilized zirconia (Y2O3: ZrO2YSZ) have been deposited in turn, using the pulsed laser deposition (PLD) technique. Five different superlattices (SDC/YSZ)N (N=3, 5, 10, 20, 30) films are fabricated, keeping the total thickness constant (300 nm), but with a different number of hetero-interfaces. The choice of coupling SDC and YSZ aims to have both layers in the superlattices made of oxygen-ion conductors with compatible crystallographic features. On one hand, we have to remove any potential contribution of the deposition substrate to the total conductivity, and the superlattices may be grown on 110-oriented MgO single-crystalline wafers. On the other hand, the YSZ electrolyte film requires that the temperature should be higher, and SDC as the electrolyte leakage; both should be combined with each other, so as to have complementary advantages. In this way, not only the temperature of SOFCs is reduced, but also the leakage avoided. Because YSZ and SDC both belong to cubic fluorite structure and have similar lattice parameters, the lattice constant of YSZ is 5.14 , and the lattice constant of SDC is 5.44 . Compatible crystal properties, oxygen ion conductivity, and great matching defects can lead to a semi-coherent interface between the ZrO2 and CeO2 layers. The interface effect is obvious. X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM) and AC impedance mearurements are used to characterize the surface morphology, phase structure and electrical properties of the electrolyte film. Results show that the superlattice (SDC/YSZ)N electrolyte films will form obviously interface and better superlattice structure. This kind of thin films do not show crack, with no element diffusion at the interfaces, growing uniformly, densely and smoothly. Electrochemical measurements show a sizable increase in conductivity with increasing number of SDC/YSZ interfaces. So it is an ideal low-temperature fuel cell electrolyte materials.

Preparation of Thin Electrolyte Film Via Dry Pressing/heating/ Quenching/calcining for Electrolyte-Supported SOFCs

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

YSZ Thin Films Prepared by a Novel Powder Coating Process on Porous NiO-YSZ Cermet

A Facile and Environment-Friendly Method to Fabricate Thin Electrolyte Films for Solid Oxide Fuel Cells

Preparation of anode supported thin electrolytes for IT-SOFCS

Fabrication and Performance of Anode-Supported Electrolyte Thin Films SOFCs

Preparation of YSZ Film by EPD and Its Application in SOFCs

Electrophoretic Deposition in the Preparation of Electrolyte Thin Films for Solid Oxide Fuel Cells

Solid Oxide Fuel Cells with Dense Yttria-Stabilized Zirconia Electrolyte Membranes Fabricated by a Dry Pressing Process

Study on Preparation of YSZ Film by Electrophoretic Deposition under Constant Current and Its Application in SOFCs

Electrophoretic deposition of YSZ thin-film electrolyte for SOFCs utilizing electrostatic-steric stabilized suspensions obtained via high energy ball milling

Nanocrystal Engineering of Thin-Film Yttria-Stabilized Zirconia Electrolytes for Low-Temperature Solid-Oxide Fuel Cells

Progresses on Fabricating of Electrolyte Thin Films for SOFCs

Development of yttria-stabilized zirconia thin films via slurry spin coating for intermediate-to-low temperature solid oxide fuel cells

Anode-supported Solid Oxide Fuel Cell Based on Dense Electrolyte Membrane Fabricated by Filter-Coating

Preparation and Characterization of the Superlattice (Sm-Doped Ceria/Yttria-Stabilized Zirconia)N Electrolyte Film

One-step preparation of large-size 1.5-μm-thick robust YSZ electrolyte for high CH 4 conversion SOFCs at 600 °C

Production of Dense Yttria-Stabilized Zirconia Thin Films by Dip-Coating for IT-SOFC Application

Scalable and facile fabrication of tri-layer electrolytes by reactive sputtering for efficient and durable solid oxide fuel cells

Fabrication and Characterizations of Ysz Electrolyte Films for Sofc

A cathode-supported SOFC with thin Ce0.8Sm0.2O1.9 electrolyte prepared by a suspension spray