Abstract:Solid-oxide fuel cells (SOFCs) technology has a substantial potential in the application of clean and efficient electric power generation. However, the widespread utilization of SOFCs has not been realized because the cost associated with cell fabrication, materials and maintenance is still too high. To increase its competitiveness, lowering the operation temperature to the intermediate range of around 500–800°C is one of the main goals in current SOFCs research. A major challenge is the development of cell materials with acceptably low ohmic and polarization losses to maintain sufficiently high electrochemical activity at reduced temperatures. During the past few decades, tremendous progress has been made in the development of cell materials and stack design, which have been recently reviewed. SOFCs are fabricated from ceramic or cermet powders. The performances of SOFCs are also closely related to the ways in which the cell materials are processed. Therefore, the optimization of synthetic processes for such materials is of great importance. The conventional solid-phase reaction method of synthesizing SOFCs materials requires high calcination and sintering temperatures, which worsen their microstructure, consequently, their electrochemical properties. Various wet chemical routes have recently been developed to synthesize submicro- to nano-sized oxide powders. This paper provides a comprehensive review on the advanced synthesis of materials for intermediate-temperature SOFCs and their impact on fuel cell performance. Combustion, co-precipitation, hydrothermal, sol–gel and polymeric-complexing processes are thoroughly reviewed. In addition, the parameters relevant to each synthesis process are compared and discussed. The effect of different processes on the electrochemical performance of the materials is evaluated and optimization of the synthesis processes is discussed and some emerging synthetic techniques are also briefly presented.

Alternative preparation methods of thin films for solid oxide fuel cells: review

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

A review on the preparation of anode materials and anode films for solid oxide fuel cell applications

Electrophoretic Deposition in the Preparation of Electrolyte Thin Films for Solid Oxide Fuel Cells

Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells

Preparation of Thin Electrolyte Film Via Dry Pressing/heating/ Quenching/calcining for Electrolyte-Supported SOFCs

A review of thin film electrolytes fabricated by physical vapor deposition for solid oxide fuel cells

A review on materials, advantages, and challenges in thin film based solid oxide fuel cells

Component fabrication techniques for solid oxide fuel cell (SOFC) – A comprehensive review and future prospects

The fabrication technique of YSZ electrolyte film

A new solid oxide fuel cell design based on thin film electrolytes

Recent Novel Fabrication Techniques for Proton-Conducting Solid Oxide Fuel Cells

Application of Novel Aerosol-Assisted Chemical Vapor Deposition Techniques for SOFC Thin Films

Fabrication and Properties of Anode-Supported Solid Oxide Fuel Cell

Manufacturing Processes of Solid Oxide Fuel Cell Components

Preparation and Performance of Nanostructured Porous Thin Cathode for Low-Temperature Solid Oxide Fuel Cells by Spin-Coating Method

Progress in proton‐conducting oxides as electrolytes for low‐temperature solid oxide fuel cells: From materials to devices

Manufacture of Electrolyte Component of SOFC

Development of Low-to-intermediate Temperature Solid State Oxide Fuel Cells

Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating below 500 °C

Review of the electrolyte materials in medium or low temperature solid oxide fuel cell