Abstract:Hydrogen technologies and especially fuel cells, are promising alternatives to achieve a carbon-free energy and an ecofriendly transition [1] . The SOFC technology (Solid Oxide Fuel Cell) is an energy conversion system composed of a stack of a porous cathode, a dense electrolyte and a porous anode working at a temperature in the [600°C – 1000°C] range to obtain ionic conductivity above 10 -2 S/cm. Nowadays, tape-casting is typically used for mass and low-cost manufacturing of supporting half-cell (8YSZ electrolyte and Ni-YSZ anode) and the cathode layer is commonly deposited by screen-printing [2] . In line with the cost reduction problematic, this presentation will describe the development and optimization of a green sequential tape casting process to obtain the anodic half-cell and screen-printing for the cathode. To target green process, aqueous based slurries are used and only non-toxic organic components are selected. The amount of organic components, ceramic powder and water was optimized to obtain slurries with a shear-thinning behavior while managing the powder dispersion stability. The parameters of the drying heat treatment have been optimized based on Thermal Gravimetric Analysis leading to obtain a multilayer flexible green tape without any bubbles or cracks further annealed to eliminate the organics and co-sinter the stack under a porous YSZ load. The flat anodic half-cell with a thin and dense layer of 8YSZ on a thick and porous layer of NiO-YSZ is completed by screen-printing of La 2 NiO 4+ δ (cathode) based ink followed by a consolidation thermal treatment. The characterization using X-ray diffraction, scanning electron microscopy and operando electrochemical tests of the cell allow validating the efficiency of the sequential tape-casting to fabricate via environmentally friendly process and low cost SOFC. [1] Rissman, J. et al. (2020) 'Technologies and policies to decarbonize global industry: Review and assessment of mitigation drivers through 2070', Applied Energy, 266, p. 114848. doi:10.1016/j.apenergy.2020.114848. [2] Udomsilp, D. et al. (2021) 'Performance Benchmark of Planar Solid Oxide Cells Based on Material Development and Design.', Energy Technology, 9. doi:10.1002/ente.202001062.

Manufacturing Processes of Solid Oxide Fuel Cell Components

Manufacture of Electrolyte Component of SOFC

Component fabrication techniques for solid oxide fuel cell (SOFC) – A comprehensive review and future prospects

Electrophoretic Deposition in the Preparation of Electrolyte Thin Films for Solid Oxide Fuel Cells

Fabrication of Electrode Supporters for Solid Oxide Fuel Cells by Tape Calendaring Process

Alternative preparation methods of thin films for solid oxide fuel cells: review

Fabrication and Properties of Anode-Supported Solid Oxide Fuel Cell

Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells

Planar Anode Supported SOFC Fabricated By Sequential Aqueous Tape Casting, Constrained Cosintering and Screen-Printing

Recent Novel Fabrication Techniques for Proton-Conducting Solid Oxide Fuel Cells

A review on the preparation of anode materials and anode films for solid oxide fuel cell applications

A Novel Co-firing Process for Multi-layers of Solid Oxide Fuel Cells

Understanding the Effect of Dispersant Rheology and Binder Decomposition on 3D Printing of a Solid Oxide Fuel Cell

Scalable and facile fabrication of tri-layer electrolytes by reactive sputtering for efficient and durable solid oxide fuel cells

Scalable fabrication process of thin-film solid oxide fuel cells with an anode functional layer design and a sputtered electrolyte

Planar SOFC fabricated by aqueous reverse sequential tape‐casting of the anode, electrolyte and barrier layer

Fabrication of Low-Temperature Solid Oxide Fuel Cells via Development of Magnetron Sputtering Process

Fabrication and Performance of Anode-Supported Electrolyte Thin Films SOFCs

Solid Oxide Fuel Cell PEN Structures Fabricated by Tape Casting and Co-Firing Technologies

Suspension Plasma Spraying to Manufacture Electrodes for Solid Oxide Fuel Cell (SOFC) and Solid Oxide Electrolysis Cell (SOEC)

Research on Sintering Process of YSZ Electrolyte