Abstract:Abstract Fuel electrode supported solid oxide cells (SOCs) have been developed on an industrial scale using the aqueous tape-casting technique. The NiO–yttria-stabilized zirconia Y 2 O 3 –ZrO 2 (YSZ) fuel electrode and YSZ electrolyte have been manufactured by multilayer co-laminated tape casting. Details of the tape-casting slurry formulations are described and discussed. Two types of cells were fabricated with different microstructures of the NiO–YSZ support discussed. Good electrochemical performance and stability in SOFC mode at 750 °C and 0.7 V for both button cells reaching around >0.75 W cm −2 and with no measurable degradation after >700 h were observed. The selected cell was scaled up to large-area cells (36 cm 2 of the active area) and electrochemically tested at 750 °C in a single repetition unit (SRU) in SOFC (Solid Oxide Fuel Cell), SOEC (Solid Oxide Electrolysis Cell) and co-SOEC (Solid Oxide co-Electrolysis Cell) mode, and in a short-stack of two SRUs in SOFC mode. A current up to 17 A was obtained at 1.4 V (0.7 V cell −1 ) with the short-stack configuration in SOFC mode, corresponding to ∼0.5 A cm −2 and 24 W. The performances of the aqueous-based SOC cells can be considered highly remarkable, thus supporting the success in scaling the fabrication of SOC stacks using more environmentally friendly processes than conventional ones.

Fabrication of Electrode Supporters for Solid Oxide Fuel Cells by Tape Calendaring Process

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

Fabrication and Properties of Anode-Supported Solid Oxide Fuel Cell

Fabrication and Performance of Anode-Supported Electrolyte Thin Films SOFCs

Fabrication of Anode Supported Micro Tubular SOFCS by Dip-Coating Process on NiO/YSZ Hollow Fibers

Fabrication and Characterization of a Cathode-Support Solid Oxide Fuel Cell by Tape Casting and Lamination

Fabrication and Interfacial Structure of Ni-YSZ-LSM Porous Scaffold for Solid Oxide Fuel Cells

Anode-supported Solid Oxide Fuel Cell Based on Dense Electrolyte Membrane Fabricated by Filter-Coating

Preparation and Performance of Tri-layer Composite Anode Supported Fuel Cell

Electrochemical Property of Multi-Layer Anode Supported Solid Oxide Fuel Cell Fabricated Through Sequential Tape-Casting and Co-Firing

Improvement of Anode-Supported Solid Oxide Fuel Cells

Tape Casting of Bilayered Anode Supports and Electrochemical Performance of SOFCs Based on Them

Co-sintering anode and Y 2O 3 stabilized ZrO 2 thin electrolyte film for solid oxide fuel cell fabricated by co-tape casting

Preparation of YSZ Film by EPD and Its Application in SOFCs

Fabrication of composite cathode by a new process for anode-supported tubular solid oxide fuel cells

Planar SOFC fabricated by aqueous reverse sequential tape‐casting of the anode, electrolyte and barrier layer

Reversible fuel electrode supported solid oxide cells fabricated by aqueous multilayered tape casting

Fabrication and Characterization of Large Size Anode Substrate of Solid Oxide Full Cell

Preparation and Electrochemical Performance of Hydrogen Electrode and Electrolyte for SOEC by Tape Casting and Lamination

Solid Oxide Fuel Cells with Dense Yttria-Stabilized Zirconia Electrolyte Membranes Fabricated by a Dry Pressing Process

Application of Yttria Stabilized Zirconia (8YSZ) and NiO Precursors for Fabrication of Composite Material for Anode-Supported SOFCs