Abstract:Solid-oxide fuel cells (SOFCs) technology has a substantial potential in the application of clean and efficient electric power generation. However, the widespread utilization of SOFCs has not been realized because the cost associated with cell fabrication, materials and maintenance is still too high. To increase its competitiveness, lowering the operation temperature to the intermediate range of around 500–800°C is one of the main goals in current SOFCs research. A major challenge is the development of cell materials with acceptably low ohmic and polarization losses to maintain sufficiently high electrochemical activity at reduced temperatures. During the past few decades, tremendous progress has been made in the development of cell materials and stack design, which have been recently reviewed. SOFCs are fabricated from ceramic or cermet powders. The performances of SOFCs are also closely related to the ways in which the cell materials are processed. Therefore, the optimization of synthetic processes for such materials is of great importance. The conventional solid-phase reaction method of synthesizing SOFCs materials requires high calcination and sintering temperatures, which worsen their microstructure, consequently, their electrochemical properties. Various wet chemical routes have recently been developed to synthesize submicro- to nano-sized oxide powders. This paper provides a comprehensive review on the advanced synthesis of materials for intermediate-temperature SOFCs and their impact on fuel cell performance. Combustion, co-precipitation, hydrothermal, sol–gel and polymeric-complexing processes are thoroughly reviewed. In addition, the parameters relevant to each synthesis process are compared and discussed. The effect of different processes on the electrochemical performance of the materials is evaluated and optimization of the synthesis processes is discussed and some emerging synthetic techniques are also briefly presented.

A review on the preparation of anode materials and anode films for solid oxide fuel cell applications

Review of solid oxide fuel cell materials: cathode, anode, and electrolyte

Review of Anodic Reactions in Hydrocarbon Fueled Solid Oxide Fuel Cells and Strategies to Improve Anode Performance and Stability

Recent advances and influencing parameters in developing electrode materials for symmetrical solid oxide fuel cells

A short review on triple conducting oxide cathode materials for proton conducting solid oxide fuel cell

Latest development of double perovskite electrode materials for solid oxide fuel cells: a review

Component fabrication techniques for solid oxide fuel cell (SOFC) – A comprehensive review and future prospects

A Review on the Process-Structure-Performance of Lanthanum Strontium Cobalt Ferrite Oxide for Solid Oxide Fuel Cells Cathodes

Alternative preparation methods of thin films for solid oxide fuel cells: review

Progress in the use of electrospun nanofiber electrodes for solid oxide fuel cells: a review

Nanostructured Materials for Enhanced Performance of Solid Oxide Fuel Cells: A Comprehensive Review

Review of composite cathodes for intermediate-temperature solid oxide fuel cell applications

Advanced Perovskite Anodes for Solid Oxide Fuel Cells: A Review

A review on the solid oxide fuel cells (SOFCs) interconnect coating quality on electrophoretic deposition (EPD) processing parameters

Recent advancements, doping strategies and the future perspective of perovskite-based solid oxide fuel cells for energy conversion

Solid oxide fuel cell: Materials for anode, cathode and electrolyte

Latest progress in fabrication and performance study of anode materials for solid oxide fuel cells

A tutorial review on solid oxide fuel cells: fundamentals, materials, and applications

Research progress of composite cathode materials for Solid oxide fuel cells

Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells

Recent advances on electrolyte materials for SOFC: A review