Abstract:Solid-oxide fuel cells (SOFCs) technology has a substantial potential in the application of clean and efficient electric power generation. However, the widespread utilization of SOFCs has not been realized because the cost associated with cell fabrication, materials and maintenance is still too high. To increase its competitiveness, lowering the operation temperature to the intermediate range of around 500–800°C is one of the main goals in current SOFCs research. A major challenge is the development of cell materials with acceptably low ohmic and polarization losses to maintain sufficiently high electrochemical activity at reduced temperatures. During the past few decades, tremendous progress has been made in the development of cell materials and stack design, which have been recently reviewed. SOFCs are fabricated from ceramic or cermet powders. The performances of SOFCs are also closely related to the ways in which the cell materials are processed. Therefore, the optimization of synthetic processes for such materials is of great importance. The conventional solid-phase reaction method of synthesizing SOFCs materials requires high calcination and sintering temperatures, which worsen their microstructure, consequently, their electrochemical properties. Various wet chemical routes have recently been developed to synthesize submicro- to nano-sized oxide powders. This paper provides a comprehensive review on the advanced synthesis of materials for intermediate-temperature SOFCs and their impact on fuel cell performance. Combustion, co-precipitation, hydrothermal, sol–gel and polymeric-complexing processes are thoroughly reviewed. In addition, the parameters relevant to each synthesis process are compared and discussed. The effect of different processes on the electrochemical performance of the materials is evaluated and optimization of the synthesis processes is discussed and some emerging synthetic techniques are also briefly presented.

Development of Low-to-intermediate Temperature Solid State Oxide Fuel Cells

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Research activities and progress on solid oxide fuel cells at USTC

Recent Advances to the Development of Low‐Temperature Solid Oxide Fuel Cells

Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating below 500 °C

Progress of cathode materials for intermediate and low-temperature solid oxide fuel cells

Development of Solid Oxide Fuel Cell Materials for Intermediate-to-low Temperature Operation

Review of the electrolyte materials in medium or low temperature solid oxide fuel cell

The composite electrolyte materials for low-temperature solid oxide fuel cell

Progress in proton‐conducting oxides as electrolytes for low‐temperature solid oxide fuel cells: From materials to devices

Review on the Development of Solid Oxide Fuel Cells

Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells

Toward Reducing the Operation Temperature of Solid Oxide Fuel Cells: Our Past 15 Years of Efforts in Cathode Development

A High Performance Cathode for Proton Conducting Solid Oxide Fuel Cells

A mini review of the recent progress of electrode materials for low-temperature solid oxide fuel cells

Development of Metal-supported Solid Oxide Fuel Cells

Low Temperature Solid Oxide Fuel Cells with Hierarchically Porous Cathode Nano-Network

Advances in Cathode Materials for Solid Oxide Fuel Cells: Complex Oxides without Alkaline Earth Metal Elements

Electrolyte material progress of low-temperature SOFC

Development of metal-supported SOFC

Advances in Solid Oxide Fuel Cell Technologies: Lowering the Operating Temperatures Through Material Innovations