Abstract:Solid-oxide fuel cells (SOFCs) technology has a substantial potential in the application of clean and efficient electric power generation. However, the widespread utilization of SOFCs has not been realized because the cost associated with cell fabrication, materials and maintenance is still too high. To increase its competitiveness, lowering the operation temperature to the intermediate range of around 500–800°C is one of the main goals in current SOFCs research. A major challenge is the development of cell materials with acceptably low ohmic and polarization losses to maintain sufficiently high electrochemical activity at reduced temperatures. During the past few decades, tremendous progress has been made in the development of cell materials and stack design, which have been recently reviewed. SOFCs are fabricated from ceramic or cermet powders. The performances of SOFCs are also closely related to the ways in which the cell materials are processed. Therefore, the optimization of synthetic processes for such materials is of great importance. The conventional solid-phase reaction method of synthesizing SOFCs materials requires high calcination and sintering temperatures, which worsen their microstructure, consequently, their electrochemical properties. Various wet chemical routes have recently been developed to synthesize submicro- to nano-sized oxide powders. This paper provides a comprehensive review on the advanced synthesis of materials for intermediate-temperature SOFCs and their impact on fuel cell performance. Combustion, co-precipitation, hydrothermal, sol–gel and polymeric-complexing processes are thoroughly reviewed. In addition, the parameters relevant to each synthesis process are compared and discussed. The effect of different processes on the electrochemical performance of the materials is evaluated and optimization of the synthesis processes is discussed and some emerging synthetic techniques are also briefly presented.

Development of metal-supported SOFC

Development of Metal-supported Solid Oxide Fuel Cells

Status and future development of metal-supported solid oxide fuel cell

Failure Mechanism and Optimization of Metal-Supported Solid Oxide Fuel Cells

A numerical analysis of metal-supported solid oxide fuel cell with a focus on temperature field

Nanostructure Electrodes for Metal-Supported Solid Oxide Fuel Cells

Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells

Development of three-layer intermediate temperature solid oxide fuel cells with direct stainless steel based anodes

Perspectives on the metallic interconnects for solid oxide fuel cells

Novel architectured metal-supported solid oxide fuel cells with Mo-doped SrFeO3−δ electrocatalysts

Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating below 500 °C

The composite electrolyte materials for low-temperature solid oxide fuel cell

Review on core-shell structured cathode for intermediate temperature solid oxide fuel cells

Metallic Interconnect Materials Used in Solid Oxide Fuel Cell

Performance and degradation of metal-supported solid oxide fuel cells with impregnated electrodes

Electrolyte material progress of low-temperature SOFC

Development Of Nanostructured And Palladium Promoted (La,Sr)Mno3-Based Cathodes For Intermediate-Temperature Sofcs

Development of Low-to-intermediate Temperature Solid State Oxide Fuel Cells

Progress of Interconnect Materials Used for SOFC

Recent Progress in Semiconductor-Ionic Conductor Nanomaterial as a Membrane for Low-Temperature Solid Oxide Fuel Cells

A cost-effective process for fabrication of metal-supported solid oxide fuel cells