Abstract:Solid-oxide fuel cells (SOFCs) technology has a substantial potential in the application of clean and efficient electric power generation. However, the widespread utilization of SOFCs has not been realized because the cost associated with cell fabrication, materials and maintenance is still too high. To increase its competitiveness, lowering the operation temperature to the intermediate range of around 500–800°C is one of the main goals in current SOFCs research. A major challenge is the development of cell materials with acceptably low ohmic and polarization losses to maintain sufficiently high electrochemical activity at reduced temperatures. During the past few decades, tremendous progress has been made in the development of cell materials and stack design, which have been recently reviewed. SOFCs are fabricated from ceramic or cermet powders. The performances of SOFCs are also closely related to the ways in which the cell materials are processed. Therefore, the optimization of synthetic processes for such materials is of great importance. The conventional solid-phase reaction method of synthesizing SOFCs materials requires high calcination and sintering temperatures, which worsen their microstructure, consequently, their electrochemical properties. Various wet chemical routes have recently been developed to synthesize submicro- to nano-sized oxide powders. This paper provides a comprehensive review on the advanced synthesis of materials for intermediate-temperature SOFCs and their impact on fuel cell performance. Combustion, co-precipitation, hydrothermal, sol–gel and polymeric-complexing processes are thoroughly reviewed. In addition, the parameters relevant to each synthesis process are compared and discussed. The effect of different processes on the electrochemical performance of the materials is evaluated and optimization of the synthesis processes is discussed and some emerging synthetic techniques are also briefly presented.

Research Progress on Preparation of Key Materials in SOFC by Electrophoretic Deposition

Electrophoretic Deposition in the Preparation of Electrolyte Thin Films for Solid Oxide Fuel Cells

A review on the solid oxide fuel cells (SOFCs) interconnect coating quality on electrophoretic deposition (EPD) processing parameters

Recent advances on electrolyte materials for SOFC: A review

Electrochemical characterization methods of the key materials for SOFC

Research progress of composite cathode materials for Solid oxide fuel cells

Research Progress of First-Principles of Cathode Materials for Solid Oxide Fuel Cells

A comprehensive review of recent progresses in cathode materials for Proton-conducting SOFCs

Preparation of YSZ Film by EPD and Its Application in SOFCs

Progress of Interconnect Materials Used for Solid Oxide Fuel Cell

The composite electrolyte materials for low-temperature solid oxide fuel cell

Progresses on Fabricating of Electrolyte Thin Films for SOFCs

Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells

Electrolyte material progress of low-temperature SOFC

Progress in the use of electrospun nanofiber electrodes for solid oxide fuel cells: a review

Advances in Cathode Materials for Solid Oxide Fuel Cells: Complex Oxides without Alkaline Earth Metal Elements

Review of the electrolyte materials in medium or low temperature solid oxide fuel cell

Review of solid oxide fuel cell materials: cathode, anode, and electrolyte

Recent advancements, doping strategies and the future perspective of perovskite-based solid oxide fuel cells for energy conversion

Study on Preparation of YSZ Film by Electrophoretic Deposition under Constant Current and Its Application in SOFCs

Advances in Ceramic Thin Films Fabricated by Pulsed Laser Deposition for Intermediate-Temperature Solid Oxide Fuel Cells