Abstract:Solid-oxide fuel cells (SOFCs) technology has a substantial potential in the application of clean and efficient electric power generation. However, the widespread utilization of SOFCs has not been realized because the cost associated with cell fabrication, materials and maintenance is still too high. To increase its competitiveness, lowering the operation temperature to the intermediate range of around 500–800°C is one of the main goals in current SOFCs research. A major challenge is the development of cell materials with acceptably low ohmic and polarization losses to maintain sufficiently high electrochemical activity at reduced temperatures. During the past few decades, tremendous progress has been made in the development of cell materials and stack design, which have been recently reviewed. SOFCs are fabricated from ceramic or cermet powders. The performances of SOFCs are also closely related to the ways in which the cell materials are processed. Therefore, the optimization of synthetic processes for such materials is of great importance. The conventional solid-phase reaction method of synthesizing SOFCs materials requires high calcination and sintering temperatures, which worsen their microstructure, consequently, their electrochemical properties. Various wet chemical routes have recently been developed to synthesize submicro- to nano-sized oxide powders. This paper provides a comprehensive review on the advanced synthesis of materials for intermediate-temperature SOFCs and their impact on fuel cell performance. Combustion, co-precipitation, hydrothermal, sol–gel and polymeric-complexing processes are thoroughly reviewed. In addition, the parameters relevant to each synthesis process are compared and discussed. The effect of different processes on the electrochemical performance of the materials is evaluated and optimization of the synthesis processes is discussed and some emerging synthetic techniques are also briefly presented.

Electrochemical characterization methods of the key materials for SOFC

Progress of Interconnect Materials Used for Solid Oxide Fuel Cell

Research Progress on Preparation of Key Materials in SOFC by Electrophoretic Deposition

The Theory and Application Prospect of Solid Oxide Fuel Cell（ SOFC ）

Rational SOFC material design: new advances and tools

Research on electrolytes for solid oxide fuel cell

State of Interconnects for Solid Oxide Fuel Cells (SOFC)

Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells

Research progress of composite cathode materials for Solid oxide fuel cells

Development of Metal-supported Solid Oxide Fuel Cells

Review of solid oxide fuel cell materials: cathode, anode, and electrolyte

The composite electrolyte materials for low-temperature solid oxide fuel cell

Research of processing techniques used in fabrication of solid oxide fuel cells and study of their selected properties

Progress of Interconnect Materials Used for SOFC

Recent advances on electrolyte materials for SOFC: A review

Review on the Development of Solid Oxide Fuel Cells

Recent advances and influencing parameters in developing electrode materials for symmetrical solid oxide fuel cells

Applications and Recent Advances of Rare Earth in Solid Oxide Fuel Cells

Recent Advances in Single Chamber Solid Oxide Fuel Cells

Failure Mechanism and Optimization of Metal-Supported Solid Oxide Fuel Cells

Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating below 500 °C