Abstract:A novel theoretical model capable of quantifying the stress causing transient thermal strain (TTS) in heated concrete has been proposed in this work. It can be used in finite element models or as a direct design equation to help structural designers in assessing the stress developed during heating of concrete members caused by combined actions of mechanical loads, heating fluxes and end restraints. The model classifies heated concrete problems into three categories; concrete members heated to a certain temperature then loaded; concrete members stressed to a certain level and then heated to a certain temperature under load; concrete members heated with fully restrained ends with or without external loading. The new TTS equation has been incorporated in a novel coupled thermo-mechanical finite element model in the framework of ABAQUS. Material models capable of capturing the constitutive behaviour and specifically the degradation of material properties experienced by concrete exposed to elevated temperatures, have been selected from the literature and have been adapted to include TTS and, where absent, temperature dependence. The FE model, along with the developed stress equation, has been validated against experimental results in which samples were tested under various loading configurations and boundary conditions. It has been shown to successfully reproduce the results for all of the studied cases. Furthermore, in exploring these scenarios a number of observations were made. Firstly, it was found that the stress developed under restraint is lower than under applied preload, but that stress relaxation in part due to TTS is higher in preloaded samples. Secondly, the limit of elastic behaviour appears to be reduced in samples subject to free thermal expansion compared to those under restraint. Finally, while free thermal expansion is critical to the overall stress-strain response there is evidence that it varies with the applied stress and significantly increases at high temperatures.

Thermo-mechanical Coupling Constitutive Model of Concrete Based on Thermodynamics

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Microstructural modeling of moisture-thermal and mechanical behavior within concrete during drying at elevated temperatures

Model for Hydration Heat of Cement in Concrete and Its Application

Cracking and thermal resistance in concrete: Coupled thermo-mechanics and phase-field modeling

A novel multi-scale model for predicting the thermal damage of hybrid fiber-reinforced concrete

Temperature-stress coupling constitutive relationship of concrete

Investigating High-Temperature Deformation Evolution of Concrete under Sustained Loading Using DIC Technology and a Temperature-Mechanical Coupled Damage Constitutive Model

Experimental investigations and micromechanical thermal fatigue models of concrete

Stress–strain constitutive equations of concrete material at elevated temperatures

An elastoplastic damage constitutive model of concrete considering the effects of dehydration and pore pressure at high temperatures

A Coupled Hygro-Thermal Model of Early-Age Concrete Based on Micro-Pore Structure Evolution

CONSTITUTIVE MODEL OF HIGTH STRENGTH CONCRETE BEHAVIOUR AT HIGTH TEMPERATURES

Thermo-Mechanistic Multi-Scale Modeling of Structural Concrete at High Temperature

Modeling Temperature-Dependent Behavior of Soft Clay

A thermal-mechanical constitutive model for cement rock based on thermodynamics and its finite element application

Study on the Constitutive Relationship between Ordinary Concrete and Nano-Titanium Dioxide-Modified Concrete at High Temperature

A Generalised Model for Direct Prediction of Stresses in Concrete at High Temperatures

A multi-scale model from microscopic cracks to macroscopic damage of concrete at elevated temperatures

Dynamic Model of Temperature Rise Caused by Cementitious Materials Hydration

Thermo-mechanical coupling damage constitutive model of rock based on the Hoek–Brown strength criterion