Abstract:Based on digital image correlation (DIC) technology and uniaxial compression tests, the deformation evolution characteristics of concrete were analyzed in the heating process under a sustained load and in the failure process under uniaxial compression. The effect of the sustained load on the mechanical properties of concrete at high temperatures was explored. A damage constitutive model of concrete under the combined action of high temperature and the sustained load was established. The research results show that a sustained load can effectively restrain the vertical thermal expansion of concrete and compact loose and weak zones of concrete. However, when the load level or temperature is too high, excessive lateral deformation of concrete will cause local strain concentration and cracking failure. In the failure process under uniaxial compression, both high temperature and sustained load can make the macroscopic cracks more smeared and branched. When the temperature is 200 C and 400 C, the sustained load has only a little enhancement effect on the high-temperature mechanical properties of concrete. When the temperature is 600 C and 800 C, the sustained load can significantly enhance the mechanical properties of concrete at high temperatures. However, at higher temperatures, excessive sustained loads can cause premature failure of the specimen. Based on the Weibull distribution, a statistical damage constitutive model of concrete under the combined action of sustained load and high temperature is established, which is in good agreement with the test curve. The curve of the degree of damage of concrete D-m shows that the sustained load causes the damage D-m to start earlier, the damage rate to increase, and the degree of damage at the peak stress to increase in the failure stage under uniaxial compression.

An elastoplastic damage constitutive model of concrete considering the effects of dehydration and pore pressure at high temperatures

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

A novel multi-scale model for predicting the thermal damage of hybrid fiber-reinforced concrete

Investigating High-Temperature Deformation Evolution of Concrete under Sustained Loading Using DIC Technology and a Temperature-Mechanical Coupled Damage Constitutive Model

A multi-scale model from microscopic cracks to macroscopic damage of concrete at elevated temperatures

An elastoplastic damage model for concrete considering the influence of mesostructure on transverse deformation

Aspects of Permeability in Modelling of Concrete Exposed to High Temperatures

Cracking and thermal resistance in concrete: Coupled thermo-mechanics and phase-field modeling

Experimental investigations and micromechanical thermal fatigue models of concrete

Comparative Analysis of Microdamage-affected Chloride Transport in Concrete under Static and Dynamic Hydraulic Pressure

Research progress on freeze–thaw constitutive model of concrete based on damage mechanics

Microstructural modeling of moisture-thermal and mechanical behavior within concrete during drying at elevated temperatures

A tensorial energy-release-rate based anisotropic damage-plasticity model for concrete

Multiscale Prediction of Thermal Damage for Hybrid Fibers Reinforced Cementitious Composites Blended with Fly Ash at High Temperatures

CONSTITUTIVE MODEL OF HIGTH STRENGTH CONCRETE BEHAVIOUR AT HIGTH TEMPERATURES

Numerical analysis of concrete under a wide range of stress and with different saturation condition

Study on the Constitutive Relationship between Ordinary Concrete and Nano-Titanium Dioxide-Modified Concrete at High Temperature

A fracture energy–based viscoelastic–viscoplastic–anisotropic damage model for rate-dependent cracking of concrete

A unified stochastic damage model for concrete based on multi-scale energy dissipation analysis

Modelling damage mechanisms of concrete under high confinement pressure

Stress–strain constitutive equations of concrete material at elevated temperatures