Abstract:Based on digital image correlation (DIC) technology and uniaxial compression tests, the deformation evolution characteristics of concrete were analyzed in the heating process under a sustained load and in the failure process under uniaxial compression. The effect of the sustained load on the mechanical properties of concrete at high temperatures was explored. A damage constitutive model of concrete under the combined action of high temperature and the sustained load was established. The research results show that a sustained load can effectively restrain the vertical thermal expansion of concrete and compact loose and weak zones of concrete. However, when the load level or temperature is too high, excessive lateral deformation of concrete will cause local strain concentration and cracking failure. In the failure process under uniaxial compression, both high temperature and sustained load can make the macroscopic cracks more smeared and branched. When the temperature is 200 C and 400 C, the sustained load has only a little enhancement effect on the high-temperature mechanical properties of concrete. When the temperature is 600 C and 800 C, the sustained load can significantly enhance the mechanical properties of concrete at high temperatures. However, at higher temperatures, excessive sustained loads can cause premature failure of the specimen. Based on the Weibull distribution, a statistical damage constitutive model of concrete under the combined action of sustained load and high temperature is established, which is in good agreement with the test curve. The curve of the degree of damage of concrete D-m shows that the sustained load causes the damage D-m to start earlier, the damage rate to increase, and the degree of damage at the peak stress to increase in the failure stage under uniaxial compression.

Microstructural modeling of moisture-thermal and mechanical behavior within concrete during drying at elevated temperatures

Concrete Thermal Cracking Analysis with Cement Hydration Model and Equivalent Age Method

Experimental investigations and micromechanical thermal fatigue models of concrete

A Coupled Hygro-Thermal Model of Early-Age Concrete Based on Micro-Pore Structure Evolution

Model for Hydration Heat of Cement in Concrete and Its Application

A novel multi-scale model for predicting the thermal damage of hybrid fiber-reinforced concrete

Cracking and thermal resistance in concrete: Coupled thermo-mechanics and phase-field modeling

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Characterization of Thermal Damage and Compressive Strength During Drying at Elevated Temperatures Using Ultrasonic Pulse Velocity

A multi-scale model from microscopic cracks to macroscopic damage of concrete at elevated temperatures

Numerical Analysis of Drying Shrinkage in Long Reinforced Concrete Structure

Effect of Elevated Temperatures on Compressive Strength of Concrete

Mesoscale Simulation of Concrete Behavior with Non-Uniform Frost Damage with Verification by CT Imaging

Numerical simulation of the freezing process of concrete

Coupling Effect of Temperature and Relative Humidity Diffusion in Concrete under Ambient Conditions

Modeling and Mesoscale Simulation of Ice-Strengthened Mechanical Properties of Concrete at Low Temperatures

Thermo-Mechanistic Multi-Scale Modeling of Structural Concrete at High Temperature

Multiscale Prediction of Thermal Damage for Hybrid Fibers Reinforced Cementitious Composites Blended with Fly Ash at High Temperatures

Multiscale Thermoelastic Analysis of the Thermal Expansion Coefficient and of Microscopic Thermal Stresses of Mature Concrete

Investigating High-Temperature Deformation Evolution of Concrete under Sustained Loading Using DIC Technology and a Temperature-Mechanical Coupled Damage Constitutive Model

An improved micromechanical model for the thermal conductivity of multi-scale fiber reinforced ultra-high performance concrete under high temperatures