Abstract:Abstract Evaluation of the concrete behavior in elevated temperatures is important in terms of first, structural construction safety under specified loadings, and second, measuring the loading capacity to continue operation. Furthermore, concrete behavior at high temperatures is strongly affected by microstructure. The calcium silicate hydrate (C–S–H), a nanostructure which is produced by hydration of cement paste, plays a significant role in enhancing the concrete strength under the impression of thermal fluctuations. Hence, this study investigates the microstructural performance of concrete exposed to high temperatures with a special focus on C–S–H nanostructure. Accordingly, 300 samples were cured for 1, 3, 7, 14, and 28 days in a moist room and then exposed to temperature range of 25–900°C for 2 h to investigate changes in their weight, length, compressive strength, and cracking behavior. Besides evaluating the microstructural behavior of the specimens in different temperatures, several techniques such as SEM, EDX, and XRD have been employed. Based on the results, any changes in the samples’ length, weight, and compressive strength depend on the C–S–H nanostructure behavior. In fact, following water decomposition from the C–S–H nanostructure at 900°C, the structure is partially converted to porous ceramic. These structural changes have caused a decline of 79–100% of the compressive strength. The compressive strength has decreased from 27.6 MPa to about 6 MPa. Also, the weight loss percentage of 28-days-old sample at this temperature was 18.84%. Based on the SEM and XRD results, this decline under high temperature arises due to the collapse of C–S–H nanostructure and formation of calcium oxide in the cement structure.

Thermo-Mechanistic Multi-Scale Modeling of Structural Concrete at High Temperature

A Dynamic FEM-DEM Multiscale Modeling Approach for Concrete Structures

Experimental study on dynamic behavior of concrete at elevated temperatures

Multiscale Prediction of Thermal Damage for Hybrid Fibers Reinforced Cementitious Composites Blended with Fly Ash at High Temperatures

A novel multi-scale model for predicting the thermal damage of hybrid fiber-reinforced concrete

Microstructural modeling of moisture-thermal and mechanical behavior within concrete during drying at elevated temperatures

Modeling and Mesoscale Simulation of Ice-Strengthened Mechanical Properties of Concrete at Low Temperatures

Study on Shear Behavior of Concrete-polymer Cement Mortar at Elevated Temperature

A multi-scale model from microscopic cracks to macroscopic damage of concrete at elevated temperatures

Uniaxial Tensile Behavior, Flexural Properties, Empirical Calculation and Microstructure of Multi-Scale Fiber Reinforced Cement-Based Material at Elevated Temperature

An improved micromechanical model for the thermal conductivity of multi-scale fiber reinforced ultra-high performance concrete under high temperatures

Model for Hydration Heat of Cement in Concrete and Its Application

Mesoscale Simulation of Concrete Behavior with Non-Uniform Frost Damage with Verification by CT Imaging

Mechanical Properties and Microstructures of Steel-basalt Hybrid Fibers Reinforced Cement-based Composites Exposed to High Temperatures

TEMPERATURE FIELD ANALYSIS IN MASSIVE CONCRETE CONSTRUCTED LAYER BY LAYER

Dynamic Tensile Properties and Energy Dissipation of High-Strength Concrete after Exposure to Elevated Temperatures

Multiscale Thermoelastic Analysis of the Thermal Expansion Coefficient and of Microscopic Thermal Stresses of Mature Concrete

Experimental investigations and micromechanical thermal fatigue models of concrete

Cracking and thermal resistance in concrete: Coupled thermo-mechanics and phase-field modeling

Experimental Study of Thermal-Hydraulic-Mechanical Coupling Behavior of High-Performance Concrete

Microstructural study of concrete performance after exposure to elevated temperatures via considering C–S–H nanostructure changes