Abstract:Based on digital image correlation (DIC) technology and uniaxial compression tests, the deformation evolution characteristics of concrete were analyzed in the heating process under a sustained load and in the failure process under uniaxial compression. The effect of the sustained load on the mechanical properties of concrete at high temperatures was explored. A damage constitutive model of concrete under the combined action of high temperature and the sustained load was established. The research results show that a sustained load can effectively restrain the vertical thermal expansion of concrete and compact loose and weak zones of concrete. However, when the load level or temperature is too high, excessive lateral deformation of concrete will cause local strain concentration and cracking failure. In the failure process under uniaxial compression, both high temperature and sustained load can make the macroscopic cracks more smeared and branched. When the temperature is 200 C and 400 C, the sustained load has only a little enhancement effect on the high-temperature mechanical properties of concrete. When the temperature is 600 C and 800 C, the sustained load can significantly enhance the mechanical properties of concrete at high temperatures. However, at higher temperatures, excessive sustained loads can cause premature failure of the specimen. Based on the Weibull distribution, a statistical damage constitutive model of concrete under the combined action of sustained load and high temperature is established, which is in good agreement with the test curve. The curve of the degree of damage of concrete D-m shows that the sustained load causes the damage D-m to start earlier, the damage rate to increase, and the degree of damage at the peak stress to increase in the failure stage under uniaxial compression.

Characterization of Thermal Damage and Compressive Strength During Drying at Elevated Temperatures Using Ultrasonic Pulse Velocity

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

Microstructural modeling of moisture-thermal and mechanical behavior within concrete during drying at elevated temperatures

Evaluation of Mechanical Properties of Concrete after Exposure to Elevated Temperatures Using Ultrasonic Pulse Velocity Measurement and a Split-Hopkinson Pressure Bar

Experimental study on dynamic behavior of concrete at elevated temperatures

Effect of Elevated Temperatures on Compressive Strength of Concrete

Multiscale Prediction of Thermal Damage for Hybrid Fibers Reinforced Cementitious Composites Blended with Fly Ash at High Temperatures

Prediction of Ultrasonic Pulse Velocity for Cement, Mortar, and Concrete Through a Multiscale Homogenization Approach.

Creep Characterization of Concrete Suffering Initial Damage

A novel multi-scale model for predicting the thermal damage of hybrid fiber-reinforced concrete

Effect of Moisture Content and Porosity on Compressive Strength of Concrete During Drying at 105 °C

Experimental investigations and micromechanical thermal fatigue models of concrete

Effect of Temperature on Pore Structure and Strength of Concrete

Experimental Study on Damage Evaluation, Pore Structure and Impact Tensile Behavior of 10-Year-Old Concrete Cores After Exposure to High Temperatures

Experimental Investigation of the Static Expansion Tensile Behavior of Concrete after Exposure to Elevated Temperatures

Mesoscale Simulation of Concrete Behavior with Non-Uniform Frost Damage with Verification by CT Imaging

Characterizing the effect of compressive damage on transport properties of cracked concretes

Investigating High-Temperature Deformation Evolution of Concrete under Sustained Loading Using DIC Technology and a Temperature-Mechanical Coupled Damage Constitutive Model

Experimental Study of Thermal-Hydraulic-Mechanical Coupling Behavior of High-Performance Concrete

Temperature‐Dependent Modulus and Ultrasonic Velocity of Concrete

Effects of elevated temperature and water re-curing on the compression behavior of hybrid fiber reinforced concrete