Abstract:The increasing risk of fire poses a significant threat to the safety of structural concrete. While the mechanical properties of concrete after exposure to elevated temperatures are well-documented, its properties during exposure remain insufficiently understood, posing challenges for effective fire-resistant design of concrete structures. This study aims to address this knowledge gap by investigating the mechanical properties of hybrid fiber and nano-silica (NS)-reinforced concrete (HFNRC) during elevated temperature exposure. Using a novel multi-functional testing apparatus designed for simultaneous heating and mechanical testing, the effects of varying steel fiber volume ratio (SFs, 0-1.5% by volume) and NS dosages (0-1.5% by weight) were examined at temperatures of 200°C (473.15K), 400°C (673.15K), 600°C (873.15K), and 800°C (1073.15K). The experimental results indicate that compressive and flexural strengths initially decreased, then increased, and subsequently decreased again as temperatures rose from 200°C to 800°C, while splitting tensile strength consistently declined. At 800°C, the compressive, splitting tensile and flexural strengths decreased by 63%, 82% and 76%, respectively. Notably, the addition of 1.5% by volume SFs increased the splitting tensile strength by up to 119% at 400°C, providing the greatest improvement among all tested properties. Empirical equations were established to predict the compressive, splitting tensile, and flexural strengths of HFNRC during elevated temperatures. Microstructural analyses using scanning electron microscopy (SEM) and X-ray diffraction (XRD) demonstrated that NS enhances the compactness of HFNRC’s matrix and promotes the formation of calcium silicate hydrate (C-S-H) gel, contributing to improved performance under fire exposure. These findings are relevant to international research focused on enhancing the fire resistance of structural materials and improving the safety of concrete structures globally.

Effects of elevated temperature and water re-curing on the compression behavior of hybrid fiber reinforced concrete

Multiscale Prediction of Thermal Damage for Hybrid Fibers Reinforced Cementitious Composites Blended with Fly Ash at High Temperatures

A novel multi-scale model for predicting the thermal damage of hybrid fiber-reinforced concrete

Mechanical Properties and Microstructures of Steel-basalt Hybrid Fibers Reinforced Cement-based Composites Exposed to High Temperatures

Dynamic Mechanical Response, Energy Absorption Capacity, and Constitutive Modeling of Polypropylene Fiber-Reinforced Foamed Concrete under High Temperature

A review on the mechanical characteristics of thermally damaged steel and polypropylene hybrid fiber-reinforced concretes

Combined Effects on Residual Strength of a High Performance Concrete Exposed to Fire

Effect of high temperature on morphologies of fibers and mechanical properties of multi-scale fiber reinforced cement-based composites

Compressive strength and impact resistance of hybrid fiber reinforced concrete exposed to elevated temperatures

Effects of High Temperature and Substitution Rates of Fly Ash on the Mechanical Properties and Microstructures of Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites

Effect of High Temperature on Residual Mechanical Properties of Confined and Unconfined High-Strength Concrete

Mechanical Properties of Hybrid Fibers and Nano Silica Reinforced Concrete During Exposure to Elevated Temperatures

Effect of Multiscale Fibers and Cenospheres on the Uniaxial Tensile Behavior of Ultra-High Performance Concrete Subjected to High Temperatures

Investigation on Toughness of Fibre Cocktail Reinforced Self Consolidating Concrete after High Temperature

Effect of Post-Fire Lime-Saturated Water and Water–co2 Cyclic Curing on Strength Recovery of Thermally Damaged High-Performance Concrete with Different Silica Contents

Effects of thermal damage on physical properties and cracking behavior of ultrahigh-performance fiber-reinforced concrete

Experimental research on strength of synthetic fiber reinforced concrete after high temperatures

Mechanical Properties of Hybrid Steel-Polypropylene Fiber Reinforced High Strength Concrete Exposed to Various Temperatures

Insights and theoretical model of thermal conductivity of thermally damaged hybrid steel-fine polypropylene fiber-reinforced concrete

Effect of Fibers on High-Temperature Mechanical Behavior and Microstructure of Reactive Powder Concrete

Mechanical Responses of Steel Fiber–Reinforced Concrete after Exposure to High Temperature: Experiments and Mesoscale Discrete Modeling