Abstract:In the present paper, the effects of thermal insulation cover curing on the rise in temperature of concrete, and further on the mechanical properties of the concrete are measured experimentally. In the experiments, polyurethane foam boards of 100 mm thickness were used for thermal insulation, and three concrete strength grades of C30, C50 and C80, were used as concrete samples. Conventional standard curing, and two heat curing methods with a constant temperature of 40 °C and 60 °C were used for comparison. The pore structure of the cement paste subject to the different curing procedures, including insulation cover curing, heat curing and standard curing, was experimentally measured using mercury intrusion porosimetry. The test results show that rate of increase in compressive strength compared with standard curing is 22–34%, 16–26%, and 23–67%, respectively, for C30, C50, C80 concrete after being subject to 1 to 3 days thermal insulation cover curing in the initial period after concrete casting. As expected, initial heat curing of concrete will result in a reduction in the long-term strength of the concrete. At 28 days, the strength reduction rate compared with standard curing due to the insulation cover curing is 3.1–5.9%, 0.6–3.0%, 0–3.2%, respectively, for C30, C50, C80 concrete. By contrast, the compressive strength reduction compared with standard curing at 28 days is 8.6–10.5%, 8.6–9.1%, 4.7–5.6%, respectively, for C30, C50, C80 concrete after being subject to a constant heat curing of 40 °C and 60 °C in the initial period after concrete casting. Measurement of the pore structure of the paste subject to different curing procedures initially after casting shows that rising curing temperature leads to coarser pores, especially an increase in capillary pore fraction. Among the four curing methods used in the present study, the effect of insulation cover curing and low temperature (40 °C) heat curing on the capillary pore content is small, while the effect of high temperature (60 °C) heat curing is significant.

Effect of Temperature on Pore Structure and Strength of Concrete

Experimental study on dynamic behavior of concrete at elevated temperatures

Effect of Elevated Temperatures on Compressive Strength of Concrete

Effect of Moisture Content and Porosity on Compressive Strength of Concrete During Drying at 105 °C

Effect of micro‐structural changes on concrete properties at elevated temperature: Current knowledge and outlook

The impact of changes in pore structure on the compressive strength of sulphoaluminate cement concrete at high temperature

Influence of elevated curing temperature on the properties of cement paste and concrete at the same hydration degree

Evaluation of Mechanical Properties of Concrete after Exposure to Elevated Temperatures Using Ultrasonic Pulse Velocity Measurement and a Split-Hopkinson Pressure Bar

Microstructural study of concrete performance after exposure to elevated temperatures via considering C–S–H nanostructure changes

Experimental Study on Damage Evaluation, Pore Structure and Impact Tensile Behavior of 10-Year-Old Concrete Cores After Exposure to High Temperatures

Influence of Elevated Temperatures on the Compressive Strength of Concrete Made with Different Types of Aggregate

Effect of thermal fatigue on mechanical properties and microstructure of concrete in constant ambient humidity

Effect of Hydration Temperature Rise Inhibitor on the Temperature Rise of Concrete and Its Mechanism

Effect of Curing Temperature on Mechanical Strength and Thermal Properties of Hydraulic Limestone Powder Concrete

Experimental Study of Thermal-Hydraulic-Mechanical Coupling Behavior of High-Performance Concrete

Dynamic Tensile Properties and Energy Dissipation of High-Strength Concrete after Exposure to Elevated Temperatures

Experimental Investigation of the Static Expansion Tensile Behavior of Concrete after Exposure to Elevated Temperatures

Effects of Moisture on Properties of Concrete Exposed to Elevated Temperature

The effects of high temperature on compressive and flexural strengths of ordinary and high-performance concrete

Effect of the Thermal Insulation Cover Curing on Temperature Rise and Early-Age Strength of Concrete

Comparison between high strength concrete and normal strength concrete subjected to high temperature