Abstract:Concrete is a heterogeneous material that consists of cement, aggregates, and water as basic constituents. Several cementitious materials and additives are added with different volumetric ratios to improve the strength and durability requirements of concrete. Consequently, performance of concrete when exposed to elevated temperature is greatly affected by the concrete type. Moreover, post-fire properties of concrete are influenced by the constituents of each concrete type. Heating rate, days of curing, type of curing, cooling method, and constituents of the mix are some of the factors that impact the post-fire behavior of concrete structures. In this paper, an extensive review was conducted and focused on the effect of concrete constituents on the overall behavior of concrete when exposed to elevated temperature. It was evident that utilizing fibers can improve the tensile capacity of concrete after exposure to higher temperatures. However, there is an increased risk of spalling due to the induced internal stresses. In addition, supplementary cementitious materials such as metakaolin and silica fume enhanced concrete strength, the latter proving to be the most effective. In terms of the heating process, it was clear that several constituents, such as silica fume or fly ash, that decrease absorption affect overall workability, increase the compressive strength of concrete, and can yield an increase in the strength of concrete at 200 °C. Most of the concrete types show a moderate and steady decrease in the strength up until 400 °C. However, the decrease is more rapid until the concrete reaches 800 °C or 1000 °C at which it spalls or cannot take any applied load. This review highlighted the need for more research and codes' provisions to account for different types of concrete constituents and advanced construction materials technology.

Effects of Moisture on Properties of Concrete Exposed to Elevated Temperature

Experimental study on dynamic behavior of concrete at elevated temperatures

Effect of Elevated Temperatures on Compressive Strength of Concrete

Influence of Heating–Cooling Regime on the Engineering Properties of Structural Concrete Subjected to Elevated Temperature

Performance of Different Concrete Types Exposed to Elevated Temperatures: A Review

Effects of Elevated Temperature on the Residual Behavior of Concrete Containing Marble Dust and Foundry Sand

High temperature effects on different grades of concrete

Dynamic Tensile Properties and Energy Dissipation of High-Strength Concrete after Exposure to Elevated Temperatures

Repeated Impact Response of Normal- and High-Strength Concrete Subjected to Temperatures up to 600 °C

Effect of micro‐structural changes on concrete properties at elevated temperature: Current knowledge and outlook

Microstructure investigation, strength assessment, and thermal modelling of concrete exposed to different heating cooling regimes

Effects of Temperature and Moisture on Concrete-PCM Interface Performance

Effect of Temperature on Pore Structure and Strength of Concrete

Effect of Moisture Content and Porosity on Compressive Strength of Concrete During Drying at 105 °C

Study on Shear Behavior of Concrete-polymer Cement Mortar at Elevated Temperature

Experimental Investigation of the Static Expansion Tensile Behavior of Concrete after Exposure to Elevated Temperatures

Aspects of Permeability in Modelling of Concrete Exposed to High Temperatures

Evaluation of Mechanical Properties of Concrete after Exposure to Elevated Temperatures Using Ultrasonic Pulse Velocity Measurement and a Split-Hopkinson Pressure Bar

Effects of elevated temperature and water re-curing on the compression behavior of hybrid fiber reinforced concrete

The effects of high temperature on compressive and flexural strengths of ordinary and high-performance concrete

Effect of high temperature or fire on heavy weight concrete properties