Abstract:Concrete is a heterogeneous material that consists of cement, aggregates, and water as basic constituents. Several cementitious materials and additives are added with different volumetric ratios to improve the strength and durability requirements of concrete. Consequently, performance of concrete when exposed to elevated temperature is greatly affected by the concrete type. Moreover, post-fire properties of concrete are influenced by the constituents of each concrete type. Heating rate, days of curing, type of curing, cooling method, and constituents of the mix are some of the factors that impact the post-fire behavior of concrete structures. In this paper, an extensive review was conducted and focused on the effect of concrete constituents on the overall behavior of concrete when exposed to elevated temperature. It was evident that utilizing fibers can improve the tensile capacity of concrete after exposure to higher temperatures. However, there is an increased risk of spalling due to the induced internal stresses. In addition, supplementary cementitious materials such as metakaolin and silica fume enhanced concrete strength, the latter proving to be the most effective. In terms of the heating process, it was clear that several constituents, such as silica fume or fly ash, that decrease absorption affect overall workability, increase the compressive strength of concrete, and can yield an increase in the strength of concrete at 200 °C. Most of the concrete types show a moderate and steady decrease in the strength up until 400 °C. However, the decrease is more rapid until the concrete reaches 800 °C or 1000 °C at which it spalls or cannot take any applied load. This review highlighted the need for more research and codes' provisions to account for different types of concrete constituents and advanced construction materials technology.

High temperature effects on different grades of concrete

Influence of Heating–Cooling Regime on the Engineering Properties of Structural Concrete Subjected to Elevated Temperature

Experimental study on dynamic behavior of concrete at elevated temperatures

Effects of Elevated Temperature on the Residual Behavior of Concrete Containing Marble Dust and Foundry Sand

Effect of high temperature or fire on heavy weight concrete properties

Performance of Different Concrete Types Exposed to Elevated Temperatures: A Review

Effect of High Temperature on Residual Mechanical Properties of Confined and Unconfined High-Strength Concrete

Repeated Impact Response of Normal- and High-Strength Concrete Subjected to Temperatures up to 600 °C

Comparison between high strength concrete and normal strength concrete subjected to high temperature

Effects of Moisture on Properties of Concrete Exposed to Elevated Temperature

The effects of high temperature on compressive and flexural strengths of ordinary and high-performance concrete

Effect of micro‐structural changes on concrete properties at elevated temperature: Current knowledge and outlook

Microstructure investigation, strength assessment, and thermal modelling of concrete exposed to different heating cooling regimes

When Fire Attacks: How does Concrete Stand up to Heat ?

Dynamic Tensile Properties and Energy Dissipation of High-Strength Concrete after Exposure to Elevated Temperatures

Experimental Study on Mechanical Properties of Early-Aged Concrete after Exposure to High Temperatures

Combined effects of high temperature and high strain rate on normal weight concrete

Mechanical properties of concrete at high temperature—A review

Effect of Elevated Temperatures on Compressive Strength of Concrete

Effect of Temperature on Thermal Properties of High-Strength Concrete

Residual Compressive Strength of High-Strength Concrete Exposed to Elevated Temperatures