Abstract:A novel theoretical model capable of quantifying the stress causing transient thermal strain (TTS) in heated concrete has been proposed in this work. It can be used in finite element models or as a direct design equation to help structural designers in assessing the stress developed during heating of concrete members caused by combined actions of mechanical loads, heating fluxes and end restraints. The model classifies heated concrete problems into three categories; concrete members heated to a certain temperature then loaded; concrete members stressed to a certain level and then heated to a certain temperature under load; concrete members heated with fully restrained ends with or without external loading. The new TTS equation has been incorporated in a novel coupled thermo-mechanical finite element model in the framework of ABAQUS. Material models capable of capturing the constitutive behaviour and specifically the degradation of material properties experienced by concrete exposed to elevated temperatures, have been selected from the literature and have been adapted to include TTS and, where absent, temperature dependence. The FE model, along with the developed stress equation, has been validated against experimental results in which samples were tested under various loading configurations and boundary conditions. It has been shown to successfully reproduce the results for all of the studied cases. Furthermore, in exploring these scenarios a number of observations were made. Firstly, it was found that the stress developed under restraint is lower than under applied preload, but that stress relaxation in part due to TTS is higher in preloaded samples. Secondly, the limit of elastic behaviour appears to be reduced in samples subject to free thermal expansion compared to those under restraint. Finally, while free thermal expansion is critical to the overall stress-strain response there is evidence that it varies with the applied stress and significantly increases at high temperatures.

Stress–strain constitutive equations of concrete material at elevated temperatures

Experimental study on dynamic behavior of concrete at elevated temperatures

A Generalised Model for Direct Prediction of Stresses in Concrete at High Temperatures

Finite element analysis of temperature effect and crack-control measures for ultra-long concrete structures

Temperature-stress coupling constitutive relationship of concrete

Concrete Constitutive Relationships Under Different Stress-Temperature Paths

An Elastoplastic Damage Model for Concrete Subjected to Sustained High Temperatures

Experimental Investigation of the Static Expansion Tensile Behavior of Concrete after Exposure to Elevated Temperatures

Effect of High Temperature on Residual Mechanical Properties of Confined and Unconfined High-Strength Concrete

TEMPERATURE FIELD ANALYSIS IN MASSIVE CONCRETE CONSTRUCTED LAYER BY LAYER

Model for Hydration Heat of Cement in Concrete and Its Application

CONSTITUTIVE MODEL OF HIGTH STRENGTH CONCRETE BEHAVIOUR AT HIGTH TEMPERATURES

Microstructural modeling of moisture-thermal and mechanical behavior within concrete during drying at elevated temperatures

Analysis of early-age thermal stress in concrete structure

Effect of Elevated Temperatures on Compressive Strength of Concrete

Dynamic Tensile Properties and Energy Dissipation of High-Strength Concrete after Exposure to Elevated Temperatures

Combined effects of high temperature and high strain rate on normal weight concrete

Simulation and Analysis of the Thermal Stress in Concrete under Temperature Fluctuation Condition

Experimental investigations and micromechanical thermal fatigue models of concrete

Microprestress solidification theory-based experimental and modeling of early-age concrete tensile creep at elevated temperatures

Elasto-Plastic Analysis of Concrete-Filled Circular Steel Tubular Stub Columns after Exposed to High Temperatures