Abstract:Little data are available on the tensile behavior of concrete after elevated temperature exposure due to the difficulty of testing concrete in tension. Thus, we proposed a static expansion tensile method, in which a soundless (or silent) chemical demolition agent (SCDA) was used, to perform a static tension experiment on elevated concretes. Before the tests, concretes were exposed to four elevated temperatures (200, 400, 600, and 800 °C) and three heating periods (2, 3, and 4 h). Immediately after the heat treatments, static expansion tension tests were performed to analyze concretes' physical and acoustic emission (AE) signal characteristics changes under different temperature conditions. The test results showed that the changes of surface features of concrete after being treated at high temperatures are related to the physical properties. With the exposure temperature and duration increase, the acoustic velocity of concrete decreases while the porosity increases. The AE signals were changed sharply throughout the loading process until the specimens were completely damaged. With the increase in temperature, the maximum energy of the AE signal had a downward trend; the maximum amplitude had a trend that kept stable first and then started to decrease; the trend of the b -value primarily remained stable and then reached a peak, finally decreasing abruptly. The constitutive behavior analysis of concrete found that the Continuous Caps Model (CSCM) agreed well with the concrete's failure process. This study will provide basic information for the theoretical and engineering analysis of concrete structures after exposure to high temperatures, especially for the structural stability analysis after a fire.

Microprestress solidification theory-based experimental and modeling of early-age concrete tensile creep at elevated temperatures

Stress Prediction in Very Early-Age Concrete Subject to Restraint under Varying Temperature Histories

EXPERIMENTAL AND THEORETICAL RESEARCH ON TENSILE CREEP OF EARLY-AGE CONCRETE

Tensile Creep Behavior of Concrete Subject to Constant Restraint at Very Early Ages

Experimental study on dynamic behavior of concrete at elevated temperatures

Early Age Properties and Cracking Control of Concrete

Tensile creep due to restraining stresses in high-strength concrete at early ages

SHORT-TERM THERMAL CREEP MODEL OF CONCRETE BASED ON EXPERIMENTS

Creep Model of High-Performance Concrete at Different Loading Ages

Tensile Creep of High Performance Concrete Under Restrained Condition

Early-age stress analysis of a concrete diaphragm wall through tensile creep modeling

Experimental Study on Early-Age Crack of Mass Concrete under the Controlled Temperature History

Measurement and Modeling of Creep Property of High-Strength Concrete Considering Stress Relaxation Effect

Numerical Simulation of High-Strength Concrete Creep under Cyclic Load

Experimental Investigation of the Static Expansion Tensile Behavior of Concrete after Exposure to Elevated Temperatures

Stress–strain constitutive equations of concrete material at elevated temperatures

Modeling and Mesoscale Simulation of Ice-Strengthened Mechanical Properties of Concrete at Low Temperatures

Analysis of early-age thermal stress in concrete structure

Measurement and Modeling Concrete Creep Considering Relative Humidity Effect

Tensile Creep Model for Concrete Subject to Constant Restraints

Double Feedback Control Method for Determining Early-Age Restrained Creep of Concrete Using a Temperature Stress Testing Machine