Abstract:Construction control theory and method of long-span prestressed concrete continuous beam bridge were summarized and estimated,and both of parameter identification and state pre-forest were necessary functions in the self-adaptive construction control system of long-span prestressed concrete continuous beam bridge.The deviation feedback equations were set up by theoretical calculation elevations and measured elevations of every cantilever segments,and the feedback deviations were divided into three parts,including measuring deviation,parameter deviation and system deviation.By introducing the vector of the parameter correction coefficient,the parameters of the beam segment weight,the hanging basket stiffness,the prestressing effects and shrinkage and creep of concrete could be corrected at real time.The correction coefficient of beam stiffness was calculated by the elevation deviation of moving hanging baskets,the correction coefficients of beam weight and hanging-basket stiffness were calculated by the elevation deviation of pouring concrete.The correction coefficient of prestressed effects was calculated by the elevation deviation of tensioning prestressed strands,and the system deviations were calculated by the total deviation of constructing one segment.Finally,every parameter correction coefficients and system deviations of next segment were predicted by the modes of GM (1,1) and CGM (1,1) based on gray prediction theory;moreover,the formwork erection elevation of the awaiting constructed beam segment was gained.Tested by the engineering example,with the cantilever segments increased,the total number of samples constantly was increased.The methods and formulas of parameter identification were proposed,which could rapidly and accurately identify the true values of every parameters,and predictive values based on gray prediction theory could be relatively stable near the true values.

Cantilever-casting Control of Prestressed Concrete Cable-Stayed Bridge

Simulation of cantilever-casting construction of prestressed concrete cable-stayed bridge

Simulating analysis of cantilever casting of prestressed concrete bridge

THE INFLUENCE OF LINEAR AND NON LINEAR FACTORS ON THE CONSTRUCTION CONTROL ANALYSIS OF CABLE-STAYED BRIDGES

Control Method of Concrete Continuous Bridge by Cantilever Casting Construction

Cable prestress and alignment double control during construction of large-span cable-stayed bridges

Unstressed Cable Length and Geometric Linear Control of Hybrid Girder Cable-Stayed Bridge with 1000 m Sale Span

Research on monitoring and control for suspender cable tension of half-through concrete filled steel tube arch bridge

Cable force adjustment and post-adjusting nonlinear analysis of a cable-stayed bridge based on ANSYS

Control of Erection of Hybridized Space Structure Using the Modified Cyclic Iteration and Initial Length Control Methods

STUDY ON THE FULL SCALE SEGMENTAL MODEL OF TOWER OF CABLE STAYED BRIDGE OF THE SECOND YANGTZE RIVER BRIDGE IN NANJING

SELF-ADAPTIVE CONSTRUCTION CONTROL ANALYSIS OF PRE-STRESSED CONCRETE CABLE-STAYED BRIDGES

Optimization and control of cable forces in a hybrid beam cable-stayed bridge based on a distributed algorithm

Experimental Study on Stability of Long-Span PC Cable-Stayed Bridge during the Construction Periods

Method Of Reasonable Finished State Of Concrete Inclined Pylon Cable-Stayed Bridge With Backstays

LINEAR CONTROL OF VARIABLE SECTION CONTINUOUS RIGID FRAME BRIDGE

Method for controlling concrete crack in negative moment regions of continuous steel-concrete composite beam bridge

Analysis of Parameters Influencing Suspender Target Cable Forces of Self-Anchored Suspension Bridge

Research on the Key Technology of Hybrid Beam Cable-stayed Bridge with Limit Side Mid-span Ratio

Intelligent Active Correction Technology and Application of Tower Displacement in Arch Bridge Cable Lifting Construction

Construction Control of South Navigable Cable-Stayed Bridge of Hangzhou Bay Sea-Crossing Bridge