Abstract:The cable-stayed bridge pylon is an important load-bearing component in bridges, especially the anchorage zone, which requires both high stiffness and load-bearing capacity. The steel-concrete-steel (SCS) sandwich composite structures provide a new alternative structural form for bridge pylons with excellent strength, stiffness, and cost-effectiveness. Besides, the modular construction of SCS sandwich composite bridge pylons achieve higher construction efficiency than traditional concrete bridge pylons. A 1:2 scaled model test was designed according to the actual project to investigate the structural behaviour of SCS sandwich composite cable anchorage under cable loading. Firstly, the stress distributions and load-displacement curves of inner and outer steel plates, and concrete cracks in the pylon anchorage zone were analyzed. Further, a simplified frame model was adopted to analyze the stresses in the cable pylon anchorage, which demonstrated that the SCS sandwich composite structures can improve the structural performance of cable anchorage. In addition, based on the finite element model verified by experimental results, the effects of section steel ratio, load-bearing plate area, section reinforcement ratio, and concrete strength on the load-bearing capacity and stress distribution in the anchorage zone were investigated. The results show that within a certain range, increasing the reinforcement ratio and load-bearing plate area can significantly increase the load carrying capacity of the cable anchorage, while the effects of increasing the cross-section reinforcement ratio and concrete strength are insignificant. The results of this paper can provide guidance to engineers in the practical application of SCS sandwich composite pylons.

The Full-scale Model Test and Spatial Analysis for the Segment of Cable Pylon of Cable-stayed Bridge

The Test and Spatial Analysis for the Full Scale Segment Model of the Cable Pylon of Poyanghukou Bridge

Structural design and analysis of a large span partially single-sided cable-stayed pedestrian bridge

THE TEST AND SPATIAL ANALYSIS FOR THE FULL SCALE SEGMENT MODEL OF THE CABLE PYLON OF THE POYANGHUKOU BRIDGE

STUDY ON THE FULL SCALE SEGMENTAL MODEL OF A TOWER OF A CABLE STAYED BRIDGE OF THE SECOND YANGIZE RIVER BRIDGE IN NANJING

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Dynamic characteristics and seismic response analysis of cable-stayed bridges taking into account cable lateral vibration

THE INFLUENCE OF LINEAR AND NON LINEAR FACTORS ON THE CONSTRUCTION CONTROL ANALYSIS OF CABLE-STAYED BRIDGES

Full-Scale Segment Model Test and Performance Improvement Scheme of Cable-Pylon Anchorage Zone for Cable-Stayed Bridge

Safety Assessment of Large Span Cable-stayed Bridge

Segmental Intelligent Model Test of Box Girder Bridge Strengthened By a Cable-Stayed System by Mathematical Calculation

Cable force adjustment and post-adjusting nonlinear analysis of a cable-stayed bridge based on ANSYS

Study on Typical Dynamic Characteristics of a Long-span Prestressed Concrete Cable-stayed Bridge

Spatial Analysis of Self-anchored Suspension Bridge and Its Experimental Study

Study on the length of cable-free zone of wide cantilever cable stayed bridge with low pylon

Simulation of cantilever-casting construction of prestressed concrete cable-stayed bridge

Steel-concrete-steel sandwich composite pylons for cable-stayed bridges: structural behaviour of cable anchorage

DESIGN AND ANALYSIS OF ARCH TOWER CABLE-STAYED BRIDGE

Multi-scale Analysis of the Steel Cable Anchorage System of Self-Anchored Suspension Bridges

Assessment of cable tension condition based on optimum cable tension of cable-stayed bridge

Analysis of the Existing Reinforced Concrete Rigid Frame Arch Bridge Strengthened with Arch and Cable System