Abstract:As a classic bridge type, cable-stayed bridge is widely used because of its superior spanning capacity. Based on the mechanical characteristics of stay cable supporting deck, we propose a novel mechanical model aiming to evaluate the vertical bending stiffness of a floating cable-stayed bridge, namely, multi-beam model with discrete springs. First, a single-tower cable-stayed bridge is modeled as a triple-beam model with discrete springs in order to introduce the novel method easily. In this model, the stay cables are simplified as springs without mass and the single tower is regarded as an Euler–Bernoulli beam with consideration of the effect of axial force. At the same time, the bridge deck has been cut into two Euler–Bernoulli beams at the intersection of a deck and a tower. Then equations governing vibrations of the beam and tower are derived according to Hamilton’s principle for dynamic problems in elastic body under equilibrium state. The program is established by transfer matrix method to solve the eigenvalues of the system along with its boundary and matching conditions. Thus, the vertical bending stiffness of the floating cable-stayed bridge can be evaluated based on the frequency. In addition, the influences of the cables’ material, location, stiffness and number on vertical bending stiffness are analyzed in detail when the steel cables are replaced with CFRP cables. Lastly, the same method is directly extended to modeling the floating multi-tower cable-stayed bridge. The results, which are validated by commercial finite element software, demonstrate that the proposed mechanical model and method are both valuable and significant not only in theoretical research and calculation but also in design of engineering.

THE INFLUENCE OF LINEAR AND NON LINEAR FACTORS ON THE CONSTRUCTION CONTROL ANALYSIS OF CABLE-STAYED BRIDGES

INVESTIGATION OF DAMPING MATRICES ACCURATE ESTIMATION OF CABLE-STAYED BRIDGES BASED ON NON-PROPORTIONAL DAMPING

Stability Analysis of Yinxian Second Bridge

Static Instability Analysis Of Long-Span Cable-Stayed Bridges With Carbon Fiber Composite Cable Under Wind Load

NONLINEAR VIBRATION OF STEEL AND CFRP CABLES OF LONG SPAN CABLE-STAYED BRIDGE UNDER VEHICULAR LOADS

Cable force adjustment and post-adjusting nonlinear analysis of a cable-stayed bridge based on ANSYS

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

Applicability of Effective Tangent Modulus Method in Evaluation of Buckling Strength of Long-Span Cable-Stayed Bridges

Nonlinear Static Analysis of Long-Span Cable-Stayed Bridges under Dead Loads

Parametric studies on cable-stayed bridges

NONLINEAR STATIC REVERSE ANALYSIS OF LONG-SPAN CABLE-STAYED BRIDGES DURING CONSTRUCTION

The Full-scale Model Test and Spatial Analysis for the Segment of Cable Pylon of Cable-stayed Bridge

Nonlinear Stability Analysis of a Composite Girder Cable-Stayed Bridge with Three Pylons during Construction

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Simulation of cantilever-casting construction of prestressed concrete cable-stayed bridge

Effect of Geometric Nonlinearity on Deformation of Extra-Long-Span Cable-Stayed Bridge

Experimental Study on Stability of Long-Span PC Cable-Stayed Bridge during the Construction Periods

Cable prestress and alignment double control during construction of large-span cable-stayed bridges

Nonlinear model for the dynamic analysis of a time-dependent vehicle-cableway bridge system

SELF-ADAPTIVE CONSTRUCTION CONTROL ANALYSIS OF PRE-STRESSED CONCRETE CABLE-STAYED BRIDGES

Modeling and Parametric Analysis of In-Plane Free Vibration of a Floating Cable-Stayed Bridge with Transfer Matrix Method