Abstract:Full tensile structures (such as cable domes, cable networks and cable trusses) are structures that only consist of cables and struts.There are three steps in its onsite construction: (1) assembly and connection, (2) towing and lifting and (3) tensioning and shaping.During construction process, the structure may suffer from large mechanism displacement and cable slack, so its initial shape was far from equilibrium.The form-finding analysis is a major difficulty in the construction process analysis.In this paper, we propose a new method for static equilibrium form-finding analysis of a cable-strut system based on a nonlinear dynamic finite element method and introduce virtual inertia and viscous damping force, as well as a series analysis techniques and a multi-step continuous solver.When the total system kinetic energy reaches its peak, the finite element model is updated, and the dynamic equilibria gradually converge to a static equilibrium state through iterative updating.To improve the analysis efficiency, stability and accuracy, key technical measures are proposed for time-step lengths, total energy peak value, model updating, convergence criteria and static equilibrium verification.In the case of the rigid cable dome in Wuxi New District Science and Technology Exchange Centre in China, we used this method to perform the mechanical analysis during the integral tow-lifting and tensioning process, and the project corresponded with our analysis.Meanwhile, we have to mention that during the construction process of integral tow-lifting, an inflection point exists in the adjustment phase, at which point the configuration stability is the worst and struts can fall sideways.Especially, for cable domes with a high rise-span ratio, the stability at the inflection point needs to be addressed.

NONLINEAR STATIC REVERSE ANALYSIS OF LONG-SPAN CABLE-STAYED BRIDGES DURING CONSTRUCTION

THE INFLUENCE OF LINEAR AND NON LINEAR FACTORS ON THE CONSTRUCTION CONTROL ANALYSIS OF CABLE-STAYED BRIDGES

Static Instability Analysis Of Long-Span Cable-Stayed Bridges With Carbon Fiber Composite Cable Under Wind Load

Nonlinear Static Analysis of Long-Span Cable-Stayed Bridges under Dead Loads

Structural design and analysis of a large span partially single-sided cable-stayed pedestrian bridge

Inverse analysis method for calculating cable tension based on controlling the initial length of cables

Cable force adjustment and post-adjusting nonlinear analysis of a cable-stayed bridge based on ANSYS

NONLINEAR VIBRATION OF STEEL AND CFRP CABLES OF LONG SPAN CABLE-STAYED BRIDGE UNDER VEHICULAR LOADS

Applicability of Effective Tangent Modulus Method in Evaluation of Buckling Strength of Long-Span Cable-Stayed Bridges

Calculation of stayed-buckle cable forces for concrete-filled steel tubular arch bridge with long span in process of lifting

OPTIMIZATION OF STAYED-BUCKLE CABLE FORCES DURING ADJUSTMENT OF THE LINE-SHAPE ON LONG SPAN ARCH BRIDGE

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

Simulation of cantilever-casting construction of prestressed concrete cable-stayed bridge

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Nonlinear Stability Analysis of a Composite Girder Cable-Stayed Bridge with Three Pylons during Construction

Cable prestress and alignment double control during construction of large-span cable-stayed bridges

Experimental Study on Stability of Long-Span PC Cable-Stayed Bridge during the Construction Periods

Nonlinear static solution of suspension bridge formulated from a surrogate model with secant stiffness of suspension cables

Effect of Geometric Nonlinearity on Deformation of Extra-Long-Span Cable-Stayed Bridge

SELF-ADAPTIVE CONSTRUCTION CONTROL ANALYSIS OF PRE-STRESSED CONCRETE CABLE-STAYED BRIDGES

STATIC EQUILIBRIUM FORM-FINDING ANALYSIS OF CABLE-STRUT SYSTEM BASED ON NONLINEAR DYNAMIC FINITE ELEMENT METHOD