Abstract:As an important part of the transportation network, the reliability of bridge structures is of great significance to people’s personal safety, as well as to the national economy. In order to evaluate the performance of complex bridge structures, their mechanical behavior and fundamental characteristics need to be studied. Structural health monitoring (SHM) has been introduced into bridge engineering, and the structural response assessment, load effects monitoring, and reliability evaluation have been developed based on the collected SHM information. In this study, a performance evaluation method for complex bridge structures based on non-destructive field loading tests is proposed. The cable-stayed bridge in Guangxi with the largest span (Pingnan Xiangsizhou Bridge) was selected as the research object, and loading on the main girder was transferred to the piers and tower through the stay cables, whose structural responses are critical in the process of bridge operation. Therefore, the field loading tests—including deflection and strain testing of the main girder, as well as cable force tests—were also conducted for Pingnan Xiangsizhou Bridge by using non-destructive measurement techniques (multifunctional static strain test system, radar interferometric deformation measurement technology, etc.). Based on the numerically simulated results of a finite element model for Pingnan Xiangsizhou Bridge, reasonable field loading test conditions and loading arrangement were determined. Non-destructive field loading test results showed that the quality of the bridge’s construction is up to standard, due to a good agreement between the calculated and measured frequencies of the bridge. In addition, the calibration coefficients of displacement and strain were less than 1, indicating that Pingnan Xiangsizhou Bridge has satisfactory stiffness and strength.

The Test and Spatial Analysis for the Full Scale Segment Model of the Cable Pylon of Poyanghukou Bridge

THE TEST AND SPATIAL ANALYSIS FOR THE FULL SCALE SEGMENT MODEL OF THE CABLE PYLON OF THE POYANGHUKOU BRIDGE

The Full-scale Model Test and Spatial Analysis for the Segment of Cable Pylon of Cable-stayed Bridge

Structural design and analysis of a large span partially single-sided cable-stayed pedestrian bridge

STUDY ON THE FULL SCALE SEGMENTAL MODEL OF TOWER OF CABLE STAYED BRIDGE OF THE SECOND YANGTZE RIVER BRIDGE IN NANJING

Dynamic characteristics and seismic response analysis of cable-stayed bridges taking into account cable lateral vibration

Full-Scale Segment Model Test and Performance Improvement Scheme of Cable-Pylon Anchorage Zone for Cable-Stayed Bridge

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Spatial Analysis of Self-anchored Suspension Bridge and Its Experimental Study

Steel-concrete-steel sandwich composite pylons for cable-stayed bridges: structural behaviour of cable anchorage

Segmental Intelligent Model Test of Box Girder Bridge Strengthened By a Cable-Stayed System by Mathematical Calculation

Study on Typical Dynamic Characteristics of a Long-span Prestressed Concrete Cable-stayed Bridge

DESIGN AND ANALYSIS OF ARCH TOWER CABLE-STAYED BRIDGE

Study on the length of cable-free zone of wide cantilever cable stayed bridge with low pylon

Safety Assessment of Large Span Cable-stayed Bridge

Test and full-process simulation analysis of the full-scale model of cable support tower segment

Cable force adjustment and post-adjusting nonlinear analysis of a cable-stayed bridge based on ANSYS

Simulation of cantilever-casting construction of prestressed concrete cable-stayed bridge

Experimental Study on Transverse Seismic Behavior of Long-Span Cable-Stayed Bridge with Two Inverted Y-Shaped Reinforced Concrete Towers

Performance Evaluation of a Long-Span Cable-Stayed Bridge Using Non-Destructive Field Loading Tests