Abstract:The 50 m box girders in the tidal flat section of unnavigable channel bridge in Hangzhou Bay Bridge adopt the approach of trolley on the under bridge to transport and erect the girder. Based on the actual working and load conditions, a precise 3D solid FEM simulation model is established by taking account of the space effects of prestressing force, applying equivalent node force and taking reasonable consideration of support details, etc. The values for concrete characteristics are determined according to current specifications for the design of highway bridge. The load is calculated with the consideration of the worst factors. The bottom of the support is simulated as rigid element. Modulus of elasticity for girder contact layer will not appear tensile stress when rotations and deformations occur at girder end. Element mesh should be as subdivided as possible when the structure is discretized. Owing to the relative complexity of the stress at girder end, thicker than span intermediate element mesh is adopted for girder end. The integral deformation and the space stress distribution of weight-bearing box girder are calculated. Results indicate that the deformation is relatively small and the maximum deflection is within the reversed arch because the load is quite close to the support. The maximum main tensile stress of the support section occurs at the side of bottom plank surface, which exceeds concrete cracking strength. Consequently, concrete in this area should be treated and stiffened so as to avoid it from cracking. When the maximum main compressive stress occurs near the stabilizer of girder-erecting machine, its value is less than the compressive strength of concrete.

STUDY ON THE FULL SCALE SEGMENTAL MODEL OF A TOWER OF A CABLE STAYED BRIDGE OF THE SECOND YANGIZE RIVER BRIDGE IN NANJING

Structural design and analysis of a large span partially single-sided cable-stayed pedestrian bridge

The Full-scale Model Test and Spatial Analysis for the Segment of Cable Pylon of Cable-stayed Bridge

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

The Test and Spatial Analysis for the Full Scale Segment Model of the Cable Pylon of Poyanghukou Bridge

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

Full-Scale Segment Model Test and Performance Improvement Scheme of Cable-Pylon Anchorage Zone for Cable-Stayed Bridge

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Segmental Intelligent Model Test of Box Girder Bridge Strengthened By a Cable-Stayed System by Mathematical Calculation

Spatial Analysis of Self-anchored Suspension Bridge and Its Experimental Study

Test and full-process simulation analysis of the full-scale model of cable support tower segment

THE TEST AND SPATIAL ANALYSIS FOR THE FULL SCALE SEGMENT MODEL OF THE CABLE PYLON OF THE POYANGHUKOU BRIDGE

Simulation of cantilever-casting construction of prestressed concrete cable-stayed bridge

Study on Typical Dynamic Characteristics of a Long-span Prestressed Concrete Cable-stayed Bridge

DESIGN AND ANALYSIS OF ARCH TOWER CABLE-STAYED BRIDGE

Safety Assessment of Large Span Cable-stayed Bridge

Multi-rib Arch Bridge Strengthened by Stayed-Cable and Field Test

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

Cable force adjustment and post-adjusting nonlinear analysis of a cable-stayed bridge based on ANSYS

Experimental Study on Transverse Seismic Behavior of Long-Span Cable-Stayed Bridge with Two Inverted Y-Shaped Reinforced Concrete Towers