Abstract:In this paper, a new approach based on the continuum model is proposed to estimate the main cable tension force of suspension bridges from measured natural frequencies. This approach considered the vertical vibration of a main cable hinged at both towers and supported by an elastic girder and hangers along its entire length. The equation reflected the relationship between vibration frequency and horizontal tension force of a main cable was derived. To avoid to generate the additional cable tension force by sag-extensibility, the analytical solution of characteristic equation for anti-symmetrical vibration mode of the main cable was calculated. Then, the estimation of main cable tension force was carried out by anti-symmetric characteristic frequency vector. The errors of estimation due to characteristic frequency deviations were investigated through numerical analysis of the main cable of Taizhou Bridge. A field experiment was conducted to verify the proposed approach. Through measuring and analyzing the responses of a main cable of Taizhou Bridge under ambient excitation, the horizontal tension force of the main cable was identified from the first three odd frequencies. It is shown that the estimated results agree well with the designed values. The proposed approach can be used to conduct the long-term health monitoring of suspension bridges.

Research on monitoring and control for suspender cable tension of half-through concrete filled steel tube arch bridge

Identification method for tensile force in hanger of arch bridges with damper and its application

Evaluation of Thermal Effects on Cable Forces of a Long-Span Prestressed Concrete Cable–Stayed Bridge

Numerical Analysis of Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges

An Identification Method For Short Hanger Tension Of Arch Bridges

Fatigue Performance Assessment of Composite Arch Bridge Suspenders Based on Actual Vehicle Loads

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Calculation of stayed-buckle cable forces for concrete-filled steel tubular arch bridge with long span in process of lifting

Estimation of Main Cable Tension Force of Suspension Bridges Based on Ambient Vibration Frequency Measurements

Monitoring of the Internal Force of the Flexible Components by Vibration Method

Automatic identification of fundamental frequency for tied arch bridge suspender tension monitoring

Monitoring and control of steel truss arch bridge jacking construction

Analysis and Monitor of Hanger Rod Installation by Jacking Tie Beam on Heterotypical Arch Bridge

Cantilever-casting Control of Prestressed Concrete Cable-Stayed Bridge

Cable Force Monitoring in Arch Bridge Suspender Replacing

Force Monitoring of Steel Cables Using Vision-Based Sensing Technology: Methodology and Experimental Verification

Analysis of the Existing Reinforced Concrete Rigid Frame Arch Bridge Strengthened with Arch and Cable System

TENSION MEASUREMENT FORMULA OF FLEXIBLE HANGER RODS IN TIED-RODS ARCH BRIDGES BASED ON VIBRATION SHAPE FUNCTION OF DEFLECTION CURVE

Design and Experimental Investigations of a Vibration Based Wireless Measurement System for Bridge Cable Tension Monitoring

STUDY ON THE FULL SCALE SEGMENTAL MODEL OF A TOWER OF A CABLE STAYED BRIDGE OF THE SECOND YANGIZE RIVER BRIDGE IN NANJING

Measuring Methods of Cable Tension in Cable-Stayed Bridges