Abstract:The study investigated the microstructure and mechanical properties of composite strengthened high-chromium cast iron by laser quenching and laser shock peening. Observation of microstructure, measurement of microhardness, residual stress and FWHM (full width at half maximum), impact toughness and wear tests were carried out on untreated, laser quenched, laser quench-laser shock peened high-chromium cast iron specimens. The research results showed that the laser shock peening will not produce new phases in high-chromium cast iron, and can further promote the transformation of retained austenite into martensite. The grains inside the laser quench-laser shock peened sample were obviously refined, and the carbides were uniformly dispersed. The laser quench-laser shock peened specimen produced large residual compressive stress and FWHM value on the surface, reaching -432.49 MPa and 2.124°, respectively. The problem of residual stress difference between the hardened zone and the transition zone caused by laser quenching was eliminated, and the tensile stress was all converted into compressive stress, which further increases the dislocation density and improves the micro-hardness. The impact toughness value of laser quench-laser shock peened specimen was 4.43 J/cm 2 , which was 16.27% higher than that of the untreated sample. The friction coefficient and wear rate were significantly reduced, and the wear scar was shallow and narrow, showing weak abrasive wear and oxidative wear, the impact toughness and wear resistance of high-chromium cast iron were improved. The results obtained from this study could be used as reference in future research and applications of laser strengthened high-chromium cast iron.

Technique Principle of Laser Hardening Steeland Cast Iron

The CSP Process Development of the Press Hardening Steel

Analysis of Laser Surface Hardening of GM246 Cast Iron

Study on laser surface hardening process of 30CrMnSiNi2A ultra-high strength steel fabricated by laser deposition manufacturing

Research of laser transformation hardening on mild steel

Laser strengthening of air-cooled diesel engine phosphorus cast iron cylinder liner and its friction & wear properties

Effect of Laser Hardening Parameters on the Valve Seat of Worm Cast Iron

Microstructure and mechanical properties of composite strengthened high-chromium cast iron by laser quenching and laser shock peening

Study on Laser Surface Hardening Behavior of 42CrMo Press Brake Die

Microstructure and Property of Laser Transformation Hardening on Sheet Steel with High Carbon Content

Effect of laser surface hardening on a low carbon steel substrate wear and hardness

Improving the Properties of Gray Cast Iron by Laser Surface Modification

Laser Transformation Hardening Process and Microstructure and Properties of 780 MPa Grade Micro-alloy Steel

The Experimental Researches and Engineering Applications on Repairing Cast-steel Components by Laser Cladding

Study on the Microstructure and Properties of Welded Joints of Laser Shock Peening on HC420LA Low-Alloy High-Tensile Steel

Microstructure and wear behavior of arc-shaped 40CrNiMo steel after laser hardening

Experimental Research and Engineering Application of Laser Cladding Reparations

Influence of multi-pass laser hardening of normalized AISI 4140 on the grain size

A Comparative Study of High-Power Diode Laser and CO2 Laser Surface Hardening of AISI 1045 Steel

Features of Steel Structure Formation in Areas of High-Speed Laser Hardening from Liquid State

Laser surface hardening process of gear