Abstract:According to experiments, the initial martensitic structure with inherent carbon content is most suitable for high-speed laser hardening during preliminary volumetric heat treatment, releasing a suitable amount and dispersion of carbides during tempering. When choosing a volumetric heat treatment mode, it is necessary to consider that the α→γ transformation during laser heating occurs via a shear mechanism with the hereditary transfer of carbon atoms and alloying elements, as well as defects in the crystal structure, to austenite from the original martensite. High-temperature laser-hardened austenite has a fragmented structure with subgrains 200–300 nm in size. This feature is due to the dynamic polygonization of austenite, which occurs because of the superposition of dynamic thermostrictive effects in the laser processing zones on phase hardening during the α→γ transition. After high-speed cooling, the irradiated zones contain hereditary fine-needle martensite with high-strength properties, a certain amount of textured residual austenite, and a carbide phase. It has been established that the strengthening of irradiated steel, which occurs under conditions of thermal deformation of laser radiation, is associated, among other things, with the formation of nanosized zones at the carbide steel matrix composition interface, which have a dispersed structure and increased hardness (10–12 GPa). Metallophysical and urometric studies showed that the maximum hardness of laser-hardened steels is achieved if dispersed carbides occupy more than 40% of the irradiated area and have dimensions of 0.5–1.5 μm. A reasonable choice of the initial steel structure and laser processing mode enabled obtaining a structural state of surface layers on the working surfaces of products having high and predictable performance properties.

Microstructure and Property of Laser Transformation Hardening on Sheet Steel with High Carbon Content

Research of laser transformation hardening on mild steel

Laser Transformation Hardening Process and Microstructure and Properties of 780 MPa Grade Micro-alloy Steel

Hardening Mechanism of Tailored Bland Laser Welding Different Thickness ULC-BH Steels

Influence of the initial structure on the efficiency of laser processing of steel

Features of Steel Structure Formation in Areas of High-Speed Laser Hardening from Liquid State

Microstructure Evolution and Mechanical Properties of AISI 430 Ferritic Stainless Steel Strengthened Through Laser Carburization

Influence of hot forming on microstructure and mechanical properties of laser tailor-welded dissimilar ultra-high-strength steels

Phase-field simulation and high-temperature confocal laser scanning microscope experimental study of Martensite transformation during the disk laser quenching process

A thermo-metallurgical-mechanical model for microstructure evolution in laser-assisted robotic roller forming of ultrahigh strength martensitic steel

Microstructure and Mechanical Properties of Laser Welded Al-Si Coated Hot-Press-Forming Steel Joints.

Effect of Multi-Layer Laser Heating on the Microstructure and Microhardness of Laser Hot-Wire Deposited FV520B Steel

A Comparative Study of High-Power Diode Laser and CO2 Laser Surface Hardening of AISI 1045 Steel

Microstructure Evolution of Martensitic Stainless Steel in Laser Hot Wire Cladding With Multiple Heating Passes

Microstructure distribution and bending fracture mechanism of 65Mn steel in the laser surface treatment

Influence of Preheating Temperature on Microstructure Evolution and Hardness of High‐Speed Steel AISI M50 Processed by Laser Powder Bed Fusion

Effect of Cryogenic Treatment on the Microstructure and Mechanical Properties of Selected Laser Melted H13 Steel

Mechanical property and microstructure of HSLA steel laser hybrid welded joint

Revealing the Enhancement Mechanism of Laser Cutting on the Strength–Ductility Combination in Low Carbon Steel

Microstructure Regulation and Mechanical Properties of Low-Carbon Multiphase Steels

Local laser softening of press-hardened steel at high feed rates