Abstract:According to experiments, the initial martensitic structure with inherent carbon content is most suitable for high-speed laser hardening during preliminary volumetric heat treatment, releasing a suitable amount and dispersion of carbides during tempering. When choosing a volumetric heat treatment mode, it is necessary to consider that the α→γ transformation during laser heating occurs via a shear mechanism with the hereditary transfer of carbon atoms and alloying elements, as well as defects in the crystal structure, to austenite from the original martensite. High-temperature laser-hardened austenite has a fragmented structure with subgrains 200–300 nm in size. This feature is due to the dynamic polygonization of austenite, which occurs because of the superposition of dynamic thermostrictive effects in the laser processing zones on phase hardening during the α→γ transition. After high-speed cooling, the irradiated zones contain hereditary fine-needle martensite with high-strength properties, a certain amount of textured residual austenite, and a carbide phase. It has been established that the strengthening of irradiated steel, which occurs under conditions of thermal deformation of laser radiation, is associated, among other things, with the formation of nanosized zones at the carbide steel matrix composition interface, which have a dispersed structure and increased hardness (10–12 GPa). Metallophysical and urometric studies showed that the maximum hardness of laser-hardened steels is achieved if dispersed carbides occupy more than 40% of the irradiated area and have dimensions of 0.5–1.5 μm. A reasonable choice of the initial steel structure and laser processing mode enabled obtaining a structural state of surface layers on the working surfaces of products having high and predictable performance properties.

Laser Transformation Hardening Process and Microstructure and Properties of 780 MPa Grade Micro-alloy Steel

Microstructure and Property of Laser Transformation Hardening on Sheet Steel with High Carbon Content

Microstructure-Property Correlations in Fiber Laser Welded Nb-Ti Microalloyed C-Mn Steel

Microstructure and wear behavior of arc-shaped 40CrNiMo steel after laser hardening

Microstructure evolution and mechanical properties of a lamellar near-α titanium alloy treated by laser shock peening

Microstructure distribution and bending fracture mechanism of 65Mn steel in the laser surface treatment

Influence of the initial structure on the efficiency of laser processing of steel

Effect of heat treatment on the microstructure and mechanical properties of 2.4 GPa grade maraging steel fabricated by laser powder bed fusion

Improving the Wear Properties of AISI4130 Steel Using Laser Surface Hardening Treatment

Local laser softening of press-hardened steel at high feed rates

Study on laser surface hardening process of 30CrMnSiNi2A ultra-high strength steel fabricated by laser deposition manufacturing

Influence of Preheating Temperature on Microstructure Evolution and Hardness of High‐Speed Steel AISI M50 Processed by Laser Powder Bed Fusion

Effects of Heat Treatments on Microstructure and Mechanical Properties of Laser Melting Multi-Layer Materials

Study on Laser Welded Heat-Affected Zone in New Ultralow Carbon Bainitic Steel

Features of Steel Structure Formation in Areas of High-Speed Laser Hardening from Liquid State

Microstructure and Mechanical Properties of Welded Joints of Titanium Alloy Ti60 after Laser Welding and Subsequent Heat Treatment

Effects of Laser Premelting Treatment on Microstructure and Mechanical Properties of High-Strength Steel Weld Obtained by Laser-MAG Hybrid Welding

High-Power Diode Laser Surface Transformation Hardening of Ferrous Alloys

Influence of laser surface re-melting on microstructure of steel-bonded carbide DGJW40 alloy prepared by electro-slag melting and casting

Influence of hot forming on microstructure and mechanical properties of laser tailor-welded dissimilar ultra-high-strength steels

Study on Δ-Ferrite Evolution and Properties of Laser Fusion Zone During Post-Weld Heat Treatment on Al-Si Coated Press-Hardened Steel